+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: INDUSTRY PARTNERS (https://65grendel.com/forumdisplay.php?fid=7)
+--- Forum: AR15 Build Box (https://65grendel.com/forumdisplay.php?fid=32)
+--- Thread: Now Shipping: 6.5 Grendel Chamber Brushes (/showthread.php?tid=15634)
Now Shipping: 6.5 Grendel Chamber Brushes - LRRPF52 - 08-03-2018
I used one brush for the initial wet brush with cleaner, and the other brush with patches and alcohol to clean out any solvent afterwards so I don't have a wet chamber.
A wet chamber is bad ju-ju as it will increase bolt thrust and pressure substantially.
Liquids don't like to be compressed, so they win the war against the brass, and you end up with floating brass with super-efficient coefficient of friction and no or limited obturation onto the chamber wall.
This is something we really need to take into consideration, especially for those that like to clean a lot, or shoot suppressed.
Now Shipping: 6.5 Grendel Chamber Brushes - Kswhitetails - 08-03-2018
Question then, is a dry patch alone enough to remove what needs to be, while leaving some thin residual or protective oil? Never heard of alcohol as the last step. I would think that would leave one open to corrosion?
Now Shipping: 6.5 Grendel Chamber Brushes - LRRPF52 - 08-03-2018
This is a nitrided barrel.
I don't like the idea of any oil in the chamber for a shooting gun.
For storage, there's an argument for keeping a Chromoly steel barrel and maybe even stainless cared for with a very light final pass with a barely-oiled patch in the bore, but I would want it dry-patched before shooting.
These are just my thoughts on it. I'm not a chemist or metallurgist, but I do know that oil in the chamber is bad ju-ju when you push the PSI that we're pushing from within a brass, high pressure gasket that goes from ambient temp to explosively-hot temps inside that gasket, with brass being very conductive.
Now Shipping: 6.5 Grendel Chamber Brushes - Popeye212 - 08-03-2018
I just got mine a day early. Thank You
Now Shipping: 6.5 Grendel Chamber Brushes - LRRPF52 - 08-06-2018
I polished my Faxon group buy barrel chamber with JBs and patches wrapped around one of my brushes.
I didn't go crazy, just a few spins on the drill, going back and forth in and out of the chamber.
Everybody is getting their brushes within 3 days I take it?
Now Shipping: 6.5 Grendel Chamber Brushes - Kswhitetails - 08-07-2018
I WISH I had these in hand when I did mine. I'm tempted to take it down - again - just to do so. I can't imagine I got as good a job done then as I would now. Alas, I think I'll pass. As well as it is shooting, and as I don't want to polish off the coating, it'll have to do. These would have made the job much easier though. Oh well, next GB!
Now Shipping: 6.5 Grendel Chamber Brushes - Sticks - 08-07-2018
Kswhitetails Wrote:.... Oh well, next GB!
The next Faxon GB better not have any issues, or I suspect there will be hell to pay.
Now Shipping: 6.5 Grendel Chamber Brushes - Kswhitetails - 08-07-2018
It may not have issues, and I'll still do this again. To any barrel I build from now on. The thing feeds like it's a paintball gun. There just isn't any kind of grit, or stick to the chamber. None at all. And the extension looks so nice compared to my other ar's it's not nice to mention their brands...
Now Shipping: 6.5 Grendel Chamber Brushes - LRRPF52 - 08-16-2018
Everybody getting their orders I take it?
If you ordered, if you could update your initial post to indicate you ordered, that would be great.
I want everyone who expressed serious interest to have the opportunity to get theirs first.
Thanks all
Now Shipping: 6.5 Grendel Chamber Brushes - biodsl - 08-17-2018
Mine arrived in quick order. Immediately cleaned a couple of chambers. Great product! It beats the heck out of trying to use a .223 brush. Thanks for doing this.
Now Shipping: 6.5 Grendel Chamber Brushes - Sticks - 08-17-2018
Had mine within a couple days of ordering. Still in the package though. I have not fired a round in a couple months. Kind of hating work right now.
Now Shipping: 6.5 Grendel Chamber Brushes - ricsmall - 08-17-2018
Ordered this am. Thanks for putting this together 52.
Now Shipping: 6.5 Grendel Chamber Brushes - Texkitch - 08-17-2018
Received mine! Easy ordering system. Thanks for your efforts!
Now Shipping: 6.5 Grendel Chamber Brushes - IescapedCali - 08-18-2018
My 2 brushes arrived very quickly after I ordered. Thanks for doing this GB. 10/10 would order again
Now Shipping: 6.5 Grendel Chamber Brushes - Neanderthal - 08-22-2018
I never saw a price on these and are there any left?
Now Shipping: 6.5 Grendel Chamber Brushes - Sticks - 08-22-2018
LRRPF52 Wrote:...
Each individual pack includes 2 chamber brushes as seen in the picture.
We're looking at standard pricing for AR15 chamber brushes, so $9.98 per 2 pack.
I'll work on some combo deals as well with existing products, mainly the Grendel Handbooks for those that don't have them yet.
Final price on the website landed at $12.98. https://www.ar15buildbox.com/shop/Cleaning-Products.htm
Now Shipping: 6.5 Grendel Chamber Brushes - mdewitt71 - 08-22-2018
Got my brushes and my Highlander camo boonie too !!!!!!!!!!!!
Thanks.
Now Shipping: 6.5 Grendel Chamber Brushes - Neanderthal - 08-23-2018
Sticks Wrote:Final price on the website landed at $12.98. https://www.ar15buildbox.com/shop/Cleaning-Products.htm
Ordered some. Thanks!
ETA: They arrived. That was quick!
Now Shipping: 6.5 Grendel Chamber Brushes - 41bear - 08-23-2018
I got my brushes and Handload book about 3 days after you posting the first shipment went out. Also want to thank you for your followup email to me, checking if I received my complete order. Both you and BFT are GREAT guys to do business with and I'm sure will get more of my money down the road.
Now Shipping: 6.5 Grendel Chamber Brushes - LRRPF52 - 08-28-2018
Thanks for the feedback and those who have updated their posts. For those that haven't yet, update your initial posts to indicate that you've ordered so I know who to contact.