+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: INDUSTRY PARTNERS (https://65grendel.com/forumdisplay.php?fid=7)
+--- Forum: Rexus Outfitters (https://65grendel.com/forumdisplay.php?fid=37)
+--- Thread: IN STOCK Hybrid MONSTER Bolt (/showthread.php?tid=21850)
IN STOCK Hybrid MONSTER Bolt - GregP42 - 05-25-2021
BluntForceTrauma Wrote:U P D A T E : Extractor Mod1 re-design is going well. Gonna be kick-ass!
BFT,
Sweet, I look forward to them. Just let me know when to send you money.
Greg
IN STOCK Hybrid MONSTER Bolt - BluntForceTrauma - 05-25-2021
If you need a bolt NOW, sorry, but don't wait for mine. Still gonna be at least three months. Manufacturing all over the country is BOOKED.
IN STOCK Hybrid MONSTER Bolt - mel - 05-30-2021
50 bolt gun max loads shot today
[video=youtube;SiN94Lhc1e8]https://www.youtube.com/watch?v=SiN94Lhc1e8[/video]
the plan is shoot 50 , magnaflux the bolt shoot 50 magnaflux the bolt etc etc
the magna fluxing will show me if the bolt is starting to fail at any point if it doesnt fail while shooting lol the plan is run it till it fails or call it a ok at 1000rds
IN STOCK Hybrid MONSTER Bolt - 41bear - 05-31-2021
BluntForceTrauma Wrote:If you need a bolt NOW, sorry, but don't wait for mine. Still gonna be at least three months. Manufacturing all over the country is BOOKED.
I'm, somewhat, taking your advise but still want/need 2 of your bolts No Matter when they show up.
IN STOCK Hybrid MONSTER Bolt - SDW - 06-03-2021
I'll wait for mine as well. I do have a spare bolt on hand, an Aero Precision, into which I swapped an improved extractor from BRA. So I can afford to be patient.
Also, I don't think I'll be doing any shooting for the next few months anyway. I only do that out in the desert east of San Diego, and temps are peaking there at around 104-107F already, these days. Probably won't let off until September.
IN STOCK Hybrid MONSTER Bolt - BluntForceTrauma - 06-09-2021
U P D A T E : Prototype MONSTER Mk136 Mod1 extractor is in and it frickin' cycles like butter. (See photo.) Very happy. Going into production.
You guys remember how all these extractors for the alternate AR calibers are weaker than a standard 5.56 extractor?
My Mk136 Mod1 extractor has 100% of the claw thickness of a standard 5.56 extractor and 97% of the head thickness. Some smart-ass is gonna say, "Wait, only 97%?" Dude. Ain't gonna get any better than that. You wanna go back to 50% like other Grendel extractors? Didn't think so.
So, our 6A/65G extractors are now basically as strong as any 5.56 extractor.
That. Is. A. Good. Thing.
Keep you updated on production ETA cuz, unfortunately, it ain't lookin' pretty these days....
IN STOCK Hybrid MONSTER Bolt - trdjohn - 06-09-2021
that is great news, I'll definitely keep my order for 1 bolt despite the additional wait time, thx for update
IN STOCK Hybrid MONSTER Bolt - GregP42 - 06-10-2021
Sweet, just waiting for the go ahead.
IN STOCK Hybrid MONSTER Bolt - sundowner - 06-10-2021
I'll be waiting for mine also .
IN STOCK Hybrid MONSTER Bolt - 41bear - 06-10-2021
My deal fell thru so I'm back up to 4, as long as it takes!
IN STOCK Hybrid MONSTER Bolt - A5BLASTER - 06-10-2021
BluntForceTrauma Wrote:U P D A T E : Prototype MONSTER Mk136 Mod1 extractor is in and it frickin' cycles like butter. (See photo.) Very happy. Going into production.
You guys remember how all these extractors for the alternate AR calibers are weaker than a standard 5.56 extractor?
My Mk136 Mod1 extractor has 100% of the claw thickness of a standard 5.56 extractor and 97% of the head thickness. Some smart-ass is gonna say, "Wait, only 97%?" Dude. Ain't gonna get any better than that. You wanna go back to 50% like other Grendel extractors? Didn't think so.
So, our 6A/65G extractors are now basically as strong as any 5.56 extractor.
That. Is. A. Good. Thing.
Keep you updated on production ETA cuz, unfortunately, it ain't lookin' pretty these days....
Lmao. Dude I see what you did there and like it lmao.
Should be a stellar design bro.
IN STOCK Hybrid MONSTER Bolt - VASCAR2 - 06-11-2021
If these new extractors are backwards compatible to old Monster bolts it sure would be nice to buy spares. Are you ordering any extra extractors?
IN STOCK Hybrid MONSTER Bolt - BluntForceTrauma - 06-12-2021
Yes, am ordering extras. There's no reason they shouldn't be backwards compatible.
IN STOCK Hybrid MONSTER Bolt - Vigilante556 - 06-30-2021
I will wait until the end of time! We thank you for the update sir!
IN STOCK Hybrid MONSTER Bolt - Mustangfreek - 07-03-2021
How much for extractor spares? Id like one at least
IN STOCK Hybrid MONSTER Bolt - mel - 07-08-2021
at 300 rds on the bolt now at bolt gun pressures and no issues , things going slower then expected works got me 6 days on at 12 hours 1 day off then back to 6/12's, hopefully we can get some new ppl hired and i can get back to normal hours again
IN STOCK Hybrid MONSTER Bolt - lazyengineer - 07-08-2021
Interested. Is the price-point for Forum members still as noted on page 1? Because I'm down for two, if so!
IN STOCK Hybrid MONSTER Bolt - BluntForceTrauma - 07-08-2021
Mod1 complete bolt assemblies (new design bolt with new design extractor) will, as always, be $55 for forum members, but $75 for general public.
IN STOCK Hybrid MONSTER Bolt - rabiddawg - 07-09-2021
BluntForceTrauma Wrote:Mod1 complete bolt assemblies (new design bolt with new design extractor) will, as always, be $55 for forum members, but $75 for general public.
This mean they are ready to order and ship?
IN STOCK Hybrid MONSTER Bolt - BluntForceTrauma - 07-09-2021
Not ready. Still in production. Keep you posted....