+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Build-It-Yourself & Custom Builds (https://65grendel.com/forumdisplay.php?fid=9)
+--- Thread: Rem 700SA 6,5 Grendel project. (/showthread.php?tid=15501)
Rem 700SA 6,5 Grendel project. - mtnlvr - 12-16-2020
Looks like a fun project! Nice work!
Rem 700SA 6,5 Grendel project. - biodsl - 12-16-2020
Sticks Wrote:Thank you for updating this thread. A member over on Snipers Hide was wondering if anyone has done this (SA bolt action typically for larger caliber) with the Grendel. I have yet to do up my MPA Comp. I need to bore a bolt for the case, and get a barrel cut.
Here's one of my favorites; a Grendel built on a Savage Scout donor chambered in 7.62x39. Same SA as the 308 family of cartridges.
https://www.65grendel.com/forum/showthread.php?4944-Bjorn-s-Savage-Grendel-project&highlight=savage
Rem 700SA 6,5 Grendel project. - Second - 03-23-2021
A little update.
I did a post previous where I put lead-pellets inside the KRG Bravo to add weight.
It have worked wry well and no moving what so ever on any if the places.
Now I have removed all of them I it also worked extremely well!
All released from the stock without any problems but with a very tight and snug fit.
So if I want and need to add weight to the stock again, I can very easily do so.
Here are the parts after removal:
[ATTACH=CONFIG]17711[/ATTACH]
[ATTACH=CONFIG]17712[/ATTACH]
To remove some of them, I drilled a small hole and screwed in a wooden screw and then just pulled them out.
The one on the underside of the forend I needed to use a hammer and tap it out. But that worked also very well.
Rem 700SA 6,5 Grendel project. - hill37 - 03-23-2021
A little off topic but I wonder if the new Remington management would consider making a Model 7 factory Grendel/ 6mmArc.
Rem 700SA 6,5 Grendel project. - Old Bob - 03-24-2021
hill37 Wrote:A little off topic but I wonder if the new Remington management would consider making a Model 7 factory Grendel/ 6mmArc.
I could dig it!
