6.5 Grendel Forum
Amend2 polymer 6.5 grendel mags - Printable Version

+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: GENERAL FIREARMS DISCUSSION (https://65grendel.com/forumdisplay.php?fid=38)
+--- Forum: Optics, Accessories, Parts, and Equipment (https://65grendel.com/forumdisplay.php?fid=14)
+--- Thread: Amend2 polymer 6.5 grendel mags (/showthread.php?tid=17089)

Pages: 1 2 3 4 5 6 7 8 9 10 11

Amend2 polymer 6.5 grendel mags - Dead Center Miss - 11-04-2018

A5BLASTER Wrote:DCM. Good to see you buddy.

Did you get the brass I mailed you?

Yes I Did. And thank you. I've been meaning to get on line a bit more but work has been crazy with overtime lately trying to get stuff done by the end of the year.

Amend2 polymer 6.5 grendel mags - A5BLASTER - 11-04-2018

Dead Center Miss Wrote:Yes I Did. And thank you. I've been meaning to get on line a bit more but work has been crazy with overtime lately trying to get stuff done by the end of the year.

Good deal was worried they got lost in the mail.

I understand sir, I'm finally getting out to hunt noe most of the season is over, dang knee surgery

Amend2 polymer 6.5 grendel mags - Dead Center Miss - 11-04-2018

Sharpshooter Lasers spent some more time on the Horde logo today after our rough up last night. He still has a few more details he wants to finish up but its starting to look awesome. I'm seriously thinking about putting this on the side of my AR lower.

[Image: IMG_20181104_142406_628_zpsf8iitgjd.jpg]

Amend2 polymer 6.5 grendel mags - A5BLASTER - 11-04-2018

Dead Center Miss Wrote:Sharpshooter Lasers spent some more time on the Horde logo today after our rough up last night. He still has a few more details he wants to finish up but its starting to look awesome. I'm seriously thinking about putting this on the side of my AR lower.

[Image: IMG_20181104_142406_628_zpsf8iitgjd.jpg]

You yankee's get all the cool stuff.

Can't get these rednecks down here to do coolness like that to anything.

Amend2 polymer 6.5 grendel mags - Dead Center Miss - 11-04-2018

A5BLASTER Wrote:You yankee's get all the cool stuff.

Can't get these rednecks down here to do coolness like that to anything.

I need to talk with BFT, but I'm thinking about doing up a group buy with the Amend2 mags if he will let me, as well as a batch of lowers with this engraved on it.

Amend2 polymer 6.5 grendel mags - Dead Center Miss - 11-04-2018

Here are some samples of other work he has done on some Amend2 223 mags.

[Image: 20181103_173944_zpskdn8irhj.jpg]

[Image: 20181103_173952_zps9volvyfy.jpg]

Amend2 polymer 6.5 grendel mags - A5BLASTER - 11-04-2018

Dead Center Miss Wrote:Here are some samples of other work he has done on some Amend2 223 mags.

[Image: 20181103_173944_zpskdn8irhj.jpg]

[Image: 20181103_173952_zps9volvyfy.jpg]

Lmao love the stripper clip one lmao.

Amend2 polymer 6.5 grendel mags - Wargrendeleagle - 11-05-2018

I'd totally be down for a group buy of the mags and even a lower. Those look sweet with the logo!

Amend2 polymer 6.5 grendel mags - AR15gunner - 11-05-2018

I'd be in for a group buy too.

Amend2 polymer 6.5 grendel mags - ericskennard - 11-06-2018

Dead Center Miss Wrote:Sharpshooter Lasers spent some more time on the Horde logo today after our rough up last night. He still has a few more details he wants to finish up but its starting to look awesome. I'm seriously thinking about putting this on the side of my AR lower.

[Image: IMG_20181104_142406_628_zpsf8iitgjd.jpg]

I would want a lower this engraved if it is approved by BFT. I would like to get my current Grendel engraved with this. As for the Amend2 mags, Gob Bless Them! They will no doubt out perform any on the market!

Amend2 polymer 6.5 grendel mags - Dead Center Miss - 11-07-2018

ericskennard Wrote:I would want a lower this engraved if it is approved by BFT. I would like to get my current Grendel engraved with this. As for the Amend2 mags, Gob Bless Them! They will no doubt out perform any on the market!

Look up sharpshooter_powersports on facebook or sharpshooter lasers on Instagram and send them a message. Tell him that Daniel Congiolosi sent you.

Amend2 polymer 6.5 grendel mags - imaguy3 - 11-12-2018

I'm curious on the amend 2 mags... have they done any extensive testing with suppressed guns?

I have the e-lander and I'm getting sick of having to take them apart every 100 rounds to clean them. When clean they run fine, but after about 100 rounds they start giving fail to feeds in the last couple rounds, then they run fine again after a cleaning.

I'm not having this issue with any magpul mags in my 223 guns, which makes me wonder if the polymer amend 2 mags would be more reliable than metal body in this respect.

Amend2 polymer 6.5 grendel mags - brian y - 11-13-2018

I would be in for the group buy for the mags

Amend2 polymer 6.5 grendel mags - Double Naught Spy - 11-13-2018

imaguy3 Wrote:I'm curious on the amend 2 mags... have they done any extensive testing with suppressed guns?

I have the e-lander and I'm getting sick of having to take them apart every 100 rounds to clean them. When clean they run fine, but after about 100 rounds they start giving fail to feeds in the last couple rounds, then they run fine again after a cleaning.

I'm not having this issue with any magpul mags in my 223 guns, which makes me wonder if the polymer amend 2 mags would be more reliable than metal body in this respect.

I don't have any trouble with suppressed 223 guns and metal mags. I don't think I have cleaned a single one of my ASC or Stoner mags since becoming suppressed. I suspect that if you are having mags fail that quickly after cleaning that there is something else already wrong that is going on for which the extra dirt is just exacerbating the issue.

Amend2 polymer 6.5 grendel mags - imaguy3 - 11-13-2018

Double Naught Spy Wrote:I don't have any trouble with suppressed 223 guns and metal mags. I don't think I have cleaned a single one of my ASC or Stoner mags since becoming suppressed. I suspect that if you are having mags fail that quickly after cleaning that there is something else already wrong that is going on for which the extra dirt is just exacerbating the issue.

I don't know. My thinking was the polymer used in the follower might be of a different blend and not have much lubricity or something as another brand and the extra crud is causing problems? I don't even have to tear the mag apart completely to clean it for function. I literally just need to push the follower down and wipe the inside of the mag body with a rag. It's pretty strange.

I do know too that it is hella filthy when shooting suppressed. The top rounds on the mags are totally covered with crud, I'll have to take a pic. when I get home of how much gets blown back into the mag.

Amend2 polymer 6.5 grendel mags - Jinkx - 11-23-2018

Bump... I'm in for group buy

Amend2 polymer 6.5 grendel mags - LRRPF52 - 11-24-2018

imaguy3 Wrote:I'm curious on the amend 2 mags... have they done any extensive testing with suppressed guns?

I have the e-lander and I'm getting sick of having to take them apart every 100 rounds to clean them. When clean they run fine, but after about 100 rounds they start giving fail to feeds in the last couple rounds, then they run fine again after a cleaning.

I'm not having this issue with any magpul mags in my 223 guns, which makes me wonder if the polymer amend 2 mags would be more reliable than metal body in this respect.

What's your suppressed set-up, because it sounds like you're getting excessive fouling from back pressure into the action.

Most of my shooting on my little 12" Grendel has been suppressed so far, but I'm using a Bootleg Adjustable Gas Carrier.

I wiped off the top of the follower of my CProducts 25rd mag after the last range trip, along with cleaning the upper receiver and spinning a Grendel chamber brush in it after letting the cleaning oil sit for a while.

Amend2 polymer 6.5 grendel mags - imaguy3 - 11-25-2018

LRRPF52 Wrote:What's your suppressed set-up, because it sounds like you're getting excessive fouling from back pressure into the action.

Most of my shooting on my little 12" Grendel has been suppressed so far, but I'm using a Bootleg Adjustable Gas Carrier.

I wiped off the top of the follower of my CProducts 25rd mag after the last range trip, along with cleaning the upper receiver and spinning a Grendel chamber brush in it after letting the cleaning oil sit for a while.

16" barrel, whatever size gas port is on a BCA Hanson barrel, regular gas block, regular buffer, Deadair Sandman K. I get no gas in my face when shooting and ejection is right at 3'0clock

Amend2 polymer 6.5 grendel mags - Cotay - 12-15-2018

So are we going to be seeing these mags anytime soon? I'm looking to pick up around 10 new AR Grendel mags and I've been holding off.

Amend2 polymer 6.5 grendel mags - A5BLASTER - 12-16-2018

Cotay Wrote:So are we going to be seeing these mags anytime soon? I'm looking to pick up around 10 new AR Grendel mags and I've been holding off.

I think they said January for a release date but can't remember exactly.