+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Build-It-Yourself & Custom Builds (https://65grendel.com/forumdisplay.php?fid=9)
+--- Thread: My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s (/showthread.php?tid=3410)
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 09-02-2013
Well, I paid about 20,-€ for about 300ml that is equal to 26$ for 10,14 fl. oz.
I think its fair because the can lasts really long.
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - KentuckyBuddha - 09-02-2013
Actually a third of a liter is more intuitive for me than 10 oz is. lol Plus, wow $26 is 20 euros....I had no idea they were that close nowadays. I would definitely pay $26 or even $35 with shipping but not so much with $100 plus shipping unless it worked as well as cerekote or something unbelievable.
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 09-06-2013
@KentuckyBuddha
Your PM box is full, I can´t contact you.
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 09-09-2013
Die and brass arrived today,...
The Hornady brass material is from excellent quality, there was no need to deburr the flash hole. The first load had the following data:
Case: Hornady
Primer: CCI450
Powder: IMR 4895 27 grs.
Bullet: Sierra MatchKing #1727 123 grs.
O.A.L. 57 mm
![[Image: 65mmGrendelersteLadeversucheFoto1.jpg]](http://s34.photobucket.com/user/kohoki/media/6-5%20GRENDEL%20AR-15/65mmGrendelersteLadeversucheFoto1.jpg.html)
![[Image: 65mmGrendelersteLadeversucheFoto3.jpg]](http://s34.photobucket.com/user/kohoki/media/6-5%20GRENDEL%20AR-15/65mmGrendelersteLadeversucheFoto3.jpg.html)
![[Image: 65mmGrendelersteLadeversucheFoto4.jpg]](http://s34.photobucket.com/user/kohoki/media/6-5%20GRENDEL%20AR-15/65mmGrendelersteLadeversucheFoto4.jpg.html)
Today we continued with a medium Vithavuori N140 based load:
Case: Hornady
Primer: CCI450
Powder: VV N140 27 grs.
Bullet: LAPUA SCENAR 123 grs. GB489
O.A.L. 57 mm
![[Image: 65mmGrendelersteLadeversucheFoto6.jpg]](http://s34.photobucket.com/user/kohoki/media/6-5%20GRENDEL%20AR-15/65mmGrendelersteLadeversucheFoto6.jpg.html)
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 09-14-2013
This company will make the muzzlebrake:
https://www.facebook.com/Muzzlebrakes
Check them out: http://www.GUNWORKS.DE!!!!
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 09-17-2013
Holy smokes, I just got informed, that the AA stuff shipped!!
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - KentuckyBuddha - 09-17-2013
Congratulations!! I am sure you will enjoy it.
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 10-03-2013
Guys, I can´t believe it!! The Alexander Arms parts reached me before I was able to process the prototype of the self made bolt (I promise to post pics beginning of next week!).
Anyway here are some pics of the Alexander Arms parts:
All the stuff that arrived yesterday (the pic shows 2 Alexander Arms Hard Use Bolts as well as a one Alexander Arms 10 rd magazine as well as one LCJ 10rd mag and one LCJ 25 rd mag and my PVD coated bolt):
![[Image: IMG_1587.jpg]](http://s34.photobucket.com/user/kohoki/media/6-5%20GRENDEL%20AR-15/IMG_1587.jpg.html)
Ach ja: You also see a Beowolf novel in the background, I thought it would be nice to know about the story, too.
Closeup of hard use bolt and extractor as well as two spare extractors:
![[Image: IMG_1590.jpg]](http://s34.photobucket.com/user/kohoki/media/6-5%20GRENDEL%20AR-15/IMG_1590.jpg.html)
Real close up of hard use bolt (can someone tell me the story behind the "stress relief cut"?):
![[Image: IMG_1591.jpg]](http://s34.photobucket.com/user/kohoki/media/6-5%20GRENDEL%20AR-15/IMG_1591.jpg.html)
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 10-03-2013
Mag 1 LCJ 25rd Mag:
![[Image: IMG_1596.jpg]](http://s34.photobucket.com/user/kohoki/media/6-5%20GRENDEL%20AR-15/IMG_1596.jpg.html)
Mag 1 close up LCJ 25rd Mag:
![[Image: IMG_1597.jpg]](http://s34.photobucket.com/user/kohoki/media/6-5%20GRENDEL%20AR-15/IMG_1597.jpg.html)
Mag 2 LCJ 10rd Mag:
![[Image: IMG_1594.jpg]](http://s34.photobucket.com/user/kohoki/media/6-5%20GRENDEL%20AR-15/IMG_1594.jpg.html)
Mag 2 close up LCJ 10rd Mag:
![[Image: IMG_1595.jpg]](http://s34.photobucket.com/user/kohoki/media/6-5%20GRENDEL%20AR-15/IMG_1595.jpg.html)
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 10-03-2013
Mag 3 Alexander Arms 10rd Mag:
![[Image: IMG_1592.jpg]](http://s34.photobucket.com/user/kohoki/media/6-5%20GRENDEL%20AR-15/IMG_1592.jpg.html)
Mag 3 close up Alexander Arms 10 rd Mag:
![[Image: IMG_1593.jpg]](http://s34.photobucket.com/user/kohoki/media/6-5%20GRENDEL%20AR-15/IMG_1593.jpg.html)
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 10-05-2013
Here comes a pic of the freshly lasered FailZero Bolt Carrier:
![[Image: FailZeroBoltCarrierfor65mmGrendelAR-15.jpg]](http://s34.photobucket.com/user/kohoki/media/6-5%20GRENDEL%20AR-15/FailZeroBoltCarrierfor65mmGrendelAR-15.jpg.html)
The whole rifle will be a hommage to the Grendel Forum, the Grendel head will be found on several parts
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Tedward - 10-05-2013
Nice touch... I'm using the same logo on my lower receiver. I'm trying to get some additional lasering too but it is pretty costly of each thing on one piece at a time. If Bulk was done, the cost could be spread out.
This might be an idea for a Group Bolt Carrier Buy....Here we go....
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 10-07-2013
Well I paid about 5 € for the laser engravings, I think that's ok
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 02-06-2014
Hi guys,
I am almost done with my Grendel project, the barrel has been delivered in time, the ERA TAC Mount is available,...
The only thing I am waiting for is the illuminated Schmidt und Bender 5-20 Ultra Short Scope...These Biebertal guys (this ohas nothing to do with that strange Canadian guy!! I mean that city near Cologne!) did not release that scope by now....
Anyway I have to ask for your help horde! My gunsmith says that the barrel manufacturer manufactured a "funny" headspace and the Lapua rounds I prepared (fully calibrated with that Redding die, OAL 57mm) won´t fit exactly.
It would be absolutely brilliant if someone of you guys could send me the dimensions of a "go gauge" so we would be able to manufacture one this weekend. I ordered one at Brownells but I am not sure if it arrives before March. Please PM me, thanks a lot!!!!
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - explorecaves - 02-06-2014
Should match up to the SAAMI drawing... http://www.saami.org/PubResources/CC_Drawings/Rifle/6_5%20Grendel.pdf
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - ejkoechling - 02-06-2014
I ordered one from Midway 2 weeks ago and it delivered in 4 days. PM coming
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 02-06-2014
All the side parts...:
http://s34.photobucket.com/user/kohoki/slideshow/6-5%20GRENDEL%20AR-15
@explorecaves
Btw, is there a secret process to optain that datasheet on that saami website using their search routine??
Their overview does not list the 6.5 Grendel:
http://www.saami.org/PubResources/CC_Drawings/C%20and%20C%20Dwgs%20-%20TOC%20-%20Rifle.pdf
The search brings up no hits....
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - explorecaves - 02-06-2014
Kohoki Wrote:All the side parts...:
http://s34.photobucket.com/user/kohoki/slideshow/6-5%20GRENDEL%20AR-15
@explorecaves
Btw, is there a secret process to optain that datasheet on that saami website using their search routine??
Their overview does not list the 6.5 Grendel:
http://www.saami.org/PubResources/CC_Drawings/C%20and%20C%20Dwgs%20-%20TOC%20-%20Rifle.pdf
The search brings up no hits....
Got the link from this thread: http://www.65grendel.com/forum/showthread.php?6566-Official-SAAMI-6.5-Grendel-cartridge-drawing-.pdf-direct-link-*here*
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 02-18-2014
Only one missing item, Schmidt & Bender 5-20x50 Ultra Short illuminated, 0.1 mrad, TREMOR 2
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - LRRPF52 - 02-18-2014
Just looked through your slide show, and I'm very excited to see what you do with this. Brügger & Thomet make some of the best cans I have ever used.
What mount is that in your slide show? It's awesome with that bubble level and angle indicator unit. You are using some of the most top-end available parts in the world across the board.