+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Military & Law Enforcement (https://65grendel.com/forumdisplay.php?fid=13)
+--- Thread: .338 mmg (/showthread.php?tid=2872)
.338 mmg - Tony Williams - 06-10-2012
The long-range indirect fire from MGs in WW1 was used against area targets - wind drift had a huge effect on the trajectory at such ranges. The emphasis nowadays is more on engaging point targets.
Others on this forum are much better at crunching the numbers than I am, but I suspect that the .338 Norma firing 300 grain bullets (MatchKing in initial testing, but ball, AP and tracer being developed) at 2,650 fps from the 24 inch MG barrel will offer trajectory/wind drift performance at 1500m much closer to the .50 BMG than the 7.62mm ball.
The 7.62mm can no doubt be improved with a better bullet, although cartridge OAL restrictions mean that longer bullets will eat more and more into the case capacity, reducing the propellant load and velocity disproportionately. This problem would be exacerbated by the extra length of the lead-free bullets the army currently favours.
.338 mmg - LRRPF52 - 06-10-2012
A 300gr .338 at 2650fps is no joke. I have friends that have been chasing, and achieving the 1st-round hit feat at 2000m with them out of TRG's. You will not be able to mass-produce Scenars and SMK's for belt-fed weapons at a reasonable cost, however. That said, you'll still have a very high-BC projectile, even if it is an FMJ with a boat tail, and a football shaped ogive if it weighs 300gr in .338 caliber.
The 250gr .338 Lock-base from Lapua is an impressive bullet, as I've literally seen guys shoot heart-sized groups with it at 1400m in the blowing, heavy rain from a TRG.
.338 mmg - Steyr94 - 07-19-2012
Imagine a scaled vulcan in .338 mounted in place of an M240 on a humvee
.338 mmg - JASmith - 07-19-2012
That would be spectacular!
Lobby Dillon Aero to build one!
.338 mmg - stanc - 01-16-2020
https://www.thefirearmblog.com/blog/2020/01/15/breaking-us-socom-purchases-sig-sauers-mg-338-machine-gun/
[video=youtube;sl3qfdvFmig]https://www.youtube.com/watch?v=sl3qfdvFmig[/video]
.338 mmg - BluntForceTrauma - 01-18-2020
Eight years ago, already, since this thread was started? Time flies and military procurement crawls!
.338 mmg - stanc - 01-25-2020
Some info on the SIG MG-338: https://youtu.be/Dzy1fnyg1y8?t=1054
![[Image: hqdefault.jpg]](https://i.ytimg.com/vi/Dzy1fnyg1y8/hqdefault.jpg)
.338 mmg - stanc - 01-25-2020
[video=youtube;j66Y_owzcTo]https://www.youtube.com/watch?v=j66Y_owzcTo[/video]
.338 mmg - stanc - 01-28-2020
[video=youtube;cSDjOM3i5_U]https://www.youtube.com/watch?v=cSDjOM3i5_U[/video]
.338 mmg - stanc - 01-31-2020
[video=youtube;XJ4vXH-RiEk]https://www.youtube.com/watch?v=XJ4vXH-RiEk[/video]
.338 mmg - stanc - 08-27-2021
[video=youtube;MKz5-aFNfhs]https://www.youtube.com/watch?v=MKz5-aFNfhs[/video]