6.5 Grendel Forum
Velocity and powder conundrum - Printable Version

+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Ammunition & Reloading (https://65grendel.com/forumdisplay.php?fid=10)
+--- Thread: Velocity and powder conundrum (/showthread.php?tid=24852)

Pages: 1 2 3


Velocity and powder conundrum - trubulator - 08-25-2022

NDSwede Wrote:Kind of wildcat. If you look at BFT’s list of favorite loads you will see several loads.

I saw those loads. Couldn't find published data anywhere, so I sort of figured this is just a community resource kind of load.


Velocity and powder conundrum - NDSwede - 08-25-2022

Kind of wildcat. If you look at BFT’s list of favorite loads you will see several loads.


Velocity and powder conundrum - trubulator - 08-28-2022

OK, finally tracked down a pound of 2520. I think I will get my hands on some 120 grain Hornady CX and test them with 2520 and CFE 223. Hornady says these expand down to 1800FPS, so if I can push them to 2500FPS from my 20" barrel I should have a good, usable load.


Velocity and powder conundrum - Harpoon1 - 08-28-2022

I haven’t had any surprises substituting Lever for CFE 223 data in the Grendel. It’s going to be hard to beat Lever for velocity with the 120-123 class bullets. And I always get way better ES/SD spreads with Lever vs CFE 223!

Having said that, I always work up from 5-7.5% below max charge when “substituting”! Starting too low can be just as big a problem, too little and the powder doesn’t burn, it detonates!