+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Ammunition & Reloading (https://65grendel.com/forumdisplay.php?fid=10)
+--- Thread: Whats wrong ? Chamber, brass, dies (/showthread.php?tid=24303)
Whats wrong ? Chamber, brass, dies - Dt219 - 03-22-2022
What I also found curious is he stated what the sammi spec was, and what my fired brass measured . Did not state what my chamber measured other than it was oversized
Whats wrong ? Chamber, brass, dies - Dt219 - 03-23-2022
And still no reply back from lilja. Good customer service.
Whats wrong ? Chamber, brass, dies - mv1arms - 03-24-2022
Maybe you could ask them to test fire it and check the brass? But it seems like they should be fully replacing this barrel.
That brass is not normal in any way and I wouldn't even reload it for safety concerns.
Whats wrong ? Chamber, brass, dies - Lemonaid - 03-25-2022
JRB has a video out that may be relevant to this thread. Check it out. https://www.youtube.com/watch?v=uVSErevKA4U
Whats wrong ? Chamber, brass, dies - Dt219 - 03-25-2022
I seen it. My hunting partners 6arc brass did that. Mine is doing something totally different I think
Whats wrong ? Chamber, brass, dies - Dt219 - 03-29-2022
Been 7 days since I told them I did not want that barrel back, still no word from them. Probably be my last dealings with lilja directly.
Whats wrong ? Chamber, brass, dies - mv1arms - 04-04-2022
So no resolution on this?
Whats wrong ? Chamber, brass, dies - Dt219 - 04-04-2022
No sir. Today is day number 13 since I told them I did not want that barrel back. I honestly cant believe it
Whats wrong ? Chamber, brass, dies - lazyengineer - 04-04-2022
Dt219 Wrote:No sir. Today is day number 13 since I told them I did not want that barrel back. I honestly cant believe itWell , you did say you don't want it back. Guess they are calling that closed!
:eek:
Whats wrong ? Chamber, brass, dies - Dt219 - 04-04-2022
I would not be surprised. About Wednesday Im going to contact them again
Whats wrong ? Chamber, brass, dies - Kosh65 - 04-04-2022
That kinda of service (or lack of) is ridiculous. I would be contacting them daily until they resolved the problem. Squeaky wheel gets the grease.
Whats wrong ? Chamber, brass, dies - LRRPF52 - 04-04-2022
Lilja has always been good in the past with CS.
Let us know how it turns out.
They offered to replace any of the initial Group Buy barrels we did if people were not happy with them, and followed-through with that promise.
Whats wrong ? Chamber, brass, dies - Dt219 - 04-06-2022
Called them just now, spoke with Carson. He said yes the chamber is on the larger side but he would not call it out of spec. I told him again that I did not trust it and would not feel good about selling it being like it is. He said its not enough there to warrant them replacing the barrel. I said all I ask is for you to do what you think is right. I guess he doesnt have any trouble sleeping. He said he will ship it out this evening. Probably a needle in a hay stack I found but this was my experience with them and its been pitiful. For sure there will not be any more lilja barrels at my house. And its for sale only in this post since you guys know the whole story and might want to take a chance with it but Im not.
Whats wrong ? Chamber, brass, dies - mv1arms - 04-06-2022
So they are flat out refusing to help you out on their chambering that they admit is out of spec... Wow.
Do you have to get injured from a case head separation before they take this seriously?
Whats wrong ? Chamber, brass, dies - lazyengineer - 04-06-2022
Dt219 Wrote:Called them just now, spoke with Carson. He said yes the chamber is on the larger side but he would not call it out of spec. I told him again that I did not trust it and would not feel good about selling it being like it is. He said its not enough there to warrant them replacing the barrel. I said all I ask is for you to do what you think is right. I guess he doesnt have any trouble sleeping. He said he will ship it out this evening. Probably a needle in a hay stack I found but this was my experience with them and its been pitiful. For sure there will not be any more lilja barrels at my house. And its for sale only in this post since you guys know the whole story and might want to take a chance with it but Im not.
Well, there you go: asked and answered. Now you know. If it were me, I'd sell it on the exchange with full disclosure. Afterall, it would appear many folks here still seem to respect the brand despite your experience. And hey, this is a factory inspected and approved barrel now.
Whats wrong ? Chamber, brass, dies - mtnlvr - 04-06-2022
He said, "on the larger side but he would not call it out of spec". Sounds like it's measuring within spec, but near one end.
In an earlier post it's is stated, "Did not state what my chamber measured other than it was oversized".
Which is it?
Whats wrong ? Chamber, brass, dies - Dt219 - 04-06-2022
In the larger size and oversized to me means the same thing. I told him prior and he stated that my fired brass measured over what saami spec was. To me Id consider that oversized and out of spec chamber. I guess to them it means just a big chamber
Whats wrong ? Chamber, brass, dies - Dt219 - 04-06-2022
I wish I could post his email to me by time I down size it you cant read jack squat. We talked on the phone today. All other prior communication was through email
Whats wrong ? Chamber, brass, dies - lazyengineer - 04-07-2022
Dt219 Wrote:In the larger size and oversized to me means the same thing. I told him prior and he stated that my fired brass measured over what saami spec was. To me Id consider that oversized and out of spec chamber. I guess to them it means just a big chamber
No no, it just means the gas cycle speed is too fast. Their gas port and location or chamber dimensions or cut or whatever being wrong has nothing to do with that of course. And running premium brass that does this stuff apparently now is super totally fine - no problem, and the issue is clearly all on you.
Yea, ... no.
you sell that barrel, you switch brass, and you never look back.
Whats wrong ? Chamber, brass, dies - StoneHendge - 04-07-2022
I would send a copy of a link of this thread to Carson. I had an out of spec issue with my Lilja 6 ARC barrel (gas block section too big), but it didn't have a safety issue and I decided to accept it rather than send it back. Glad I didn't waste my time. I'm in the market for a long .223 bull and crossed an AR 740 off my list:
"These barrels are a true match-grade barrel, we only have one grade for all of our barrels, our best."
If that their best, .......