6.5 Grendel Forum
319 lilja test day failure - Printable Version

+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Target & Competition Shooting (https://65grendel.com/forumdisplay.php?fid=12)
+--- Thread: 319 lilja test day failure (/showthread.php?tid=7573)

Pages: 1 2


319 lilja test day failure - Adam Lilja - 03-26-2014

NugginFutz Wrote:Interesting proposition. Would they be cut with the same reamer(s) as on the production line?

Yar matey


319 lilja test day failure - JASmith - 03-26-2014

Do you plan to make a partial section so we can see the shoulder, neck, freebore, and throat?


319 lilja test day failure - Adam Lilja - 03-26-2014

Pds sent me this PM a week or so ago. Just in the talking stage right now, but I think I would make them similar to this.

Adam,
It would be a nice option for Dan to offer one of these gauges for his Grendel barrels. http://www.bullberry.com/reloading_supplies.html. With all the issues with Grendel owners trying to find seating depths on their rifles bet you'd sell a bunch of these.

Any chance?

Paul


319 lilja test day failure - Kikn - 03-26-2014

I would be interested in having one as long as i could keep an arm or a leg intact :-p


319 lilja test day failure - JASmith - 03-26-2014

Adam,

Thanks for taking Paul's suggestion seriously.

The link is indeed to the chamber I have. The only problem I have with the 6.5 Grendel Chamber Gauge from there is that I can't see the entire throat.

Regards


319 lilja test day failure - BjornF16 - 03-26-2014

Adam Lilja Wrote:If we offered guages for our Grendel drop ins... ?

...I'd order one.


319 lilja test day failure - burkew23 - 03-26-2014

I'd definitely be interested...


319 lilja test day failure - explorecaves - 03-27-2014

BjornF16 Wrote:...I'd order one.

I'll be ordering 2 as soon as they are available along with 2 of the other item we have been talking about.


319 lilja test day failure - cory - 03-27-2014

Adam Lilja Wrote:Pds sent me this PM a week or so ago. Just in the talking stage right now, but I think I would make them similar to this.

Adam,
It would be a nice option for Dan to offer one of these gauges for his Grendel barrels. http://www.bullberry.com/reloading_supplies.html. With all the issues with Grendel owners trying to find seating depths on their rifles bet you'd sell a bunch of these.

Any chance?

Paul

I'll take one. Let me know if you decide to sell them and I'll send an email to everyone that was in on the group buy.


319 lilja test day failure - cst - 03-27-2014

Put me in for one too.


319 lilja test day failure - Smud Dude - 03-27-2014

And 1 for me. Cory, you have a great idea, though not everyone in the group buy loads their own I'd think most do.


319 lilja test day failure - explorecaves - 03-27-2014

Adam - your inbox is full.


319 lilja test day failure - Buster - 03-27-2014

Adam Lilja Wrote:If we offered guages for our Grendel drop ins... ?

Do we need to start a group buy for these units?


319 lilja test day failure - Kikn - 03-29-2014

Not trying to deter the group buy here at all....Tongue but back on track here.

I've sized some once fired brass (all/mostfrom my lilja build)

I've checked and the few that i checked chambered OK.

I'm going to make up some more of the same and hopefully get to the range tomorrow.

I got my trijicon back after sending it back for a third time in the last year.and I am going to mount it to my older 16" and test those other rounds and have a comparison between the two hopefully.


319 lilja test day failure - Kikn - 03-29-2014

Well about 4 hours later I have finally finished reloading 60 test rounds... now all I have to do is mount a scope and I'll be good to go tomorrow.

Amazing how long it takes to reload ammo...and how short a time it takes to fire them off....

But after leaving the tumbler on and going to work for 9 hours my brass is shinier than factory ammo Smile


319 lilja test day failure - Kikn - 03-30-2014

Made it to the range today I started a new thread.

To see more bad from yours truly just follow this link to my next debacle

http://www.65grendel.com/forum/showthread.php?8363-Range-Day-Lilja-319-Vs.-AA-16-quot