+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Photo Gallery (https://65grendel.com/forumdisplay.php?fid=16)
+--- Thread: .264 lbc (/showthread.php?tid=3500)
Pages:
1
2
.264 lbc - 6.8 KLR - 08-17-2012
woohoo Wrote:Plain old H335 from 2008 33gr.
30gr of 10X will do it too.
CCI 41 or 450 primers, SSA brass once fired.
The Nosler 110s are a little longer so I cut back to 32.5 gr of H335 for a hunting load.
I too have been looking for more velocity with the 110 G. Accubond, thans for the info. Do you load for the .264 LBC ? If so what is your fastest load with a 100 G. Balistic Tip or 100 Grain TTSX ? Thanks
.264 lbc - bobke - 08-17-2012
Do a search for 10X in Grendel. I thought it'd work, too, but have been counseled here against same.
.264 lbc - woohoo - 08-17-2012
6.8 KLR Wrote:I too have been looking for more velocity with the 110 G. Accubond, thans for the info. Do you load for the .264 LBC ? If so what is your fastest load with a 100 G. Balistic Tip or 100 Grain TTSX ? ThanksI ran 28 and 28.5gr of 10X behind the 100gr Lapua and NBT. 2830-2840 out of a 22" Rock back in 07. Changed chambers and rifling design and haven't had much time to test with reloads since. I was able to load out to 2.3" so work up to it and check the location of the lands before pushing it.
.264 lbc - bwaites - 08-17-2012
10X is asking for significant problems. Very unpredictable in the Grendel case.
The old board had a long thread on it. It pressure spikes severely, with little warning.