My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s

My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Printable Version

+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Build-It-Yourself & Custom Builds (https://65grendel.com/forumdisplay.php?fid=9)
+--- Thread: My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s (/showthread.php?tid=3410)

Pages: 1 2 3 4 5 6

My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 02-11-2013

Besides the lasered Grendel Logo, the PRI delta handguard will get a set of decal stickers as seen on the A-10 Warthog:

[Image: a4392829-250-a-10%20sharkmouth%20left.png?d=1320348925]

[Image: a4392829-250-a-10%20sharkmouth%20left.png?d=1320348925]

The set is in production right now (app. 9 cm x 4 cm)

My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 06-26-2013

Hi again,

the project is going on, I almost got all my parts together, the barrel is in preparation as well as the decal stickers. It will be awesome!

My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 06-29-2013

Guys, it is time to order the barrel. As I described in the past it will be a 20" Lothar Walther custom made barrel. Here comes the spec, comments are highly appreciated:

Length: 20"
Gasport: Rifle length
Gassystem: Noveske Switchblock
Gasport diameter: ??
Twistrate: 1/9 or 1/8.75 (I want to use 123grs. and above, whats your suggestion?
Diameter from barrelnut to gasport: 25,4mm fluted
Diameter from gasport to muzzle: 19mm fluted
Glassbeadblasted & Titaniumaluminumoxide PVD coating

My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - ricsmall - 06-29-2013

Sounds great! Either twist will be fine, though if you want to go to a longer,lead free projo, the faster twist may be better. Gas port diameter should be .0935 on a 20". Looking forward to range report on this build.

My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 07-10-2013

Thanks to Gswamp, the decals arrived!!! I decorated the dedicated pelicase 1700 for my Grendel immediately:

Waiting for the Grendel parts from Alexander Arms right now, does anyone have a clue how long the orders take right now?

Cheers

Tom

My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 07-13-2013

Product Update:

Upper Receiver: VLTOR MUR 1A - check
Lower Receiver: DAR - DAR Lower Advanced - check
Handguard: PRI GenIII Delta Carbon Fiber Forearm Rifle Length Black inc. decal set - check
Top Rail: PRI Gen III Delta Forearm SPR Straight Top Rail rifle length - check
Barrel & Barrel Extension: 20" Lothar Walther 1/8 Twist, 2.4mm Gasport diameter, QPQ coated - not ordered yet
Bolt: Alexander Arms - not delivered yet, does anbybody know what delivery times to expect there??
Bolt Carrier: High Standard Semi Auto or Fail Zero, - not ordered yet, What would you choose?
Gas block: Noveske Switchblock 5.56 Rifle length - check
Stock: MAGPUL UBR + Aluminum Strike Plate + 0.7" Rubber butt pad - check
Trigger: Wilson Combat TTU 3G - on its way
Safety Selector: BadAss Ambidextrous - on its way
Charging Handle: Rainier Arms Raptor™- check
Mag Release: Norgon Ambi Mag Catch - check
Magazines: Alexander Arms 10 rd, - see bolt
Reloading die set: Redding S-Type full length die set Brownells No. 749-008-199WB - on backorder
Grip: BCM GUNFIGHTER™ Grip Mod 1 - Black - check
Muzzlebrake: GUNWORKS VAULT556 M15x1- check
Silencer: Brügger & Thomet ROTEX V SD-988119 - ordered
Scope: Schmidt & Bender PMII Ultra Short 3-20x50 - ordered
Lens Covers: Tenebraex ARD + TT Covers - ordered
Bipod: Atlas BT10-LW17 + Cleat feet, spikes & pouch - check
Scopemount: ERATAC BlockMount - check
Case: Pelicase 1700 - check

All products I already have in my hands are marked green, the products I am waiting for are marked red.

My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - KentuckyBuddha - 07-13-2013

Well you have gone and done it now sir. You made me want to go get some Pelican cases for all my stuff (to be fair this was aided by the fact I just got a couple of Pelican coolers). And, now all of a sudden I painfully want a Jagerschnitzel and an Andech's. This is clearly your fault.

Kidding aside. How did you get a Waffenbesitzkarte for a weapon like that? The German folk threw a fit when they realized I had an AR-15 at home. Oh, and which Bundeslander are you from sir?

My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 07-13-2013

@KentuckyBuddha
With pleasure, especially your desire to get a Jägerschnitzel and an Andechs pilsener! I just opened a JEVER Pils to celebrate the delivery of the Atlas bipod Wink

If you ever get a chance to get one, get one! I got several Waffenbesitzkarten (yellow, green and red), the red (one allows me to buy everything because it is a authorized experts license). I am living in Baden Würtemberg.

My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - XcountryRider - 07-13-2013

I ordered two bolts back in Feb and they haven't showed up. Good luck with that. If they ever come i may sell.

My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 07-13-2013

@XcountryRider

Wow, that sounds inadmissible. I think it is a no-go to tell you on the website that all products are on backorder and then let you wait for half a year. What do they say if you call them?

My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - XcountryRider - 07-13-2013

Kohoki Wrote:@XcountryRider

Wow, that sounds inadmissible. I think it is a no-go to tell you on the website that all products are on backorder and then let you wait for half a year. What do they say if you call them?

I haven't i got bolts with the barrels i picked up off midwayusa so not in any hurry. When they come i was just going use them as back ups in case i break a lug or something.

My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 07-15-2013

Joking aside, does anyone know what delivery times to expect at Alexander Arms?

My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 08-30-2013

Just received my Fail Zero Bolt Carrier today!!! It is awesome!!!
After a first inspection I wiped all the fingerprints away with a cloth and some isopropanol. After that I coated it with a special PTFE/Ceramic spray I got from Austria (http://www.guncoating.at/). These Austrian guys are really nice, I think they ship to the U.S. Try it out, its worth it!!!

If you try to touch the bolt carrier now it seems like your fingers don´t make it to the surface, it feels like an air bearing...awesome!

My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - cory - 08-30-2013

Kohoki Wrote:Joking aside, does anyone know what delivery times to expect at Alexander Arms?

The day before never.

I ordered a couple of hard use bolts as eventual back ups a month ago. While I was placing the order I kept hearing the old Smash mouth song Walking in on the Sun playing in head.

"So don't delay act now supplies are running out
Allow if you're still alive six to eight years to arrive
And if you follow there may be a tomorrow
But if the offer's shunned you might as well be walkin' on the sun"

My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 09-01-2013

I think we can forget our orders at Alexander Arms, all spare part orders placed this year won´t be delivered in this year.

My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - montana - 09-01-2013

Kohoki Wrote:Just received my Fail Zero Bolt Carrier today!!! It is awesome!!!
After a first inspection I wiped all the fingerprints away with a cloth and some isopropanol. After that I coated it with a special PTFE/Ceramic spray I got from Austria (http://www.guncoating.at/). These Austrian guys are really nice, I think they ship to the U.S. Try it out, its worth it!!!

If you try to touch the bolt carrier now it seems like your fingers don´t make it to the surface, it feels like an air bearing...awesome!

They don't export into the U.S yet, but are looking into it.

My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 09-02-2013

I received my Lapua and my Sierra bullets today, here comes a short dimension comparison, just for entertainment:

My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - KentuckyBuddha - 09-02-2013

Kohoki Wrote:Just received my Fail Zero Bolt Carrier today!!! It is awesome!!!
After a first inspection I wiped all the fingerprints away with a cloth and some isopropanol. After that I coated it with a special PTFE/Ceramic spray I got from Austria (http://www.guncoating.at/). These Austrian guys are really nice, I think they ship to the U.S. Try it out, its worth it!!!

If you try to touch the bolt carrier now it seems like your fingers don´t make it to the surface, it feels like an air bearing...awesome!

I didn't contact the Austrian's directly but I did get a message to their Canadian distributor...and they tell me it costs $100 a can here! It would have to be pretty amazing at that price. lol

My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - Kohoki - 09-02-2013

Well, 100 bucks a can is quite heavy, I think that would be caused by freight and shipping costs because it's an aerosol,right?

My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - KentuckyBuddha - 09-02-2013

Oh I have no idea why it is so much. How many euros a can is it there sir?