+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel ARs and Other Semi-Autos (https://65grendel.com/forumdisplay.php?fid=8)
+--- Thread: What 6.5 Grendel Magazines Are Best? (/showthread.php?tid=24572)
What 6.5 Grendel Magazines Are Best? - Dub - 06-01-2022
Primary Arms has the 20rd DURAMAG for $19 and is running 12% sale right now, too.
[ATTACH=CONFIG]18867[/ATTACH]
What 6.5 Grendel Magazines Are Best? - Two Tone - 06-01-2022
Primary Arm 26 rounders on backorder! Thanks.
What 6.5 Grendel Magazines Are Best? - TedBrewer5 - 06-03-2022
I have been using 6.8 SPC mags lately. Cant remember where I saw a post about someone using them in the Grendel. I have no issues or complaints
What 6.5 Grendel Magazines Are Best? - Goochylogic - 06-04-2022
TedBrewer5 Wrote:I have been using 6.8 SPC mags lately. Cant remember where I saw a post about someone using them in the Grendel. I have no issues or complaintsTedBrewer5, I have used the PRI 68 mags with no problems at all. My elanders work good but are very noisy. So much that I only use them at the range, not to hunt with.
What 6.5 Grendel Magazines Are Best? - Two Tone - 06-05-2022
Duramag 20 rounders came in today.
I think the rather hard curve to them looks a bit silly but if they work fine, that won't matter.
Thanks for the advice guys.
What 6.5 Grendel Magazines Are Best? - Two Tone - 06-05-2022
TedBrewer5 Wrote:I have been using 6.8 SPC mags lately. Cant remember where I saw a post about someone using them in the Grendel. I have no issues or complaints
What size of 6.8 SPC mags?
What 6.5 Grendel Magazines Are Best? - StoneHendge - 06-05-2022
Two Tone Wrote:Duramag 20 rounders came in today.
I think the rather hard curve to them looks a bit silly but if they work fine, that won't matter.
Thanks for the advice guys.
I don't know if the curve is completely necessary for feeding, but it keeps it completely clear of the ground when shooting prone off an Atlas bipod at the lowest setting. I also like the way it pinches into a support bag when shooting off of barricades, etc.
What 6.5 Grendel Magazines Are Best? - TedBrewer5 - 06-05-2022
My 6.8 mags are ASC 10 rds
What 6.5 Grendel Magazines Are Best? - Double Naught Spy - 06-06-2022
TedBrewer5 Wrote:My 6.8 mags are ASC 10 rds
Yeah, they may work for lower capacity, but maybe not for higher capacity.
What 6.5 Grendel Magazines Are Best? - TedBrewer5 - 06-06-2022
To your point, I generally do not run the maxed out for my hunting purposes. I will load them up fully on my next range trip and test fully loaded.
What 6.5 Grendel Magazines Are Best? - Double Naught Spy - 06-06-2022
Right, so I can use a .223 30 round magazine with no problems or issues either, so long as I don't load more than 5 rounds in it. That doesn't make it a good or best magazine for the job. It is just functional in a limited capacity.
Noted 6.8 mag issues...
https://www.65grendel.com/forum/showthread.php?4381-Grendel-not-optimal-for-AR-15-sized-magazines&highlight=6.8+spc+magazine
https://www.65grendel.com/forum/showthread.php?1604-Grendel-Mag-Idea&highlight=6.8+spc+magazine
Maybe you can get 10 rounds to work fine in a 10 round magazine. That would be great, but that may not extrapolate to larger mag capacities.
What 6.5 Grendel Magazines Are Best? - Two Tone - 07-24-2022
Two Tone Wrote:Primary Arm 26 rounders on backorder! Thanks.
So that's where I backordered those from! I completely forgot.
And just last night I ordered the same from Tombstone Tactical. Oh well, this'll put me "in a good spot" in mags for this caliber I guess.
What 6.5 Grendel Magazines Are Best? - fmyellowj - 07-25-2022
I really like ASC 25 round mags. I've bought loads of them (Washington state) and haven't had any issues in the five or so years they've been in use. They have a standard AR magazine profile so any typical magazine pouch fits them perfect.
What 6.5 Grendel Magazines Are Best? - lazyengineer - 07-26-2022
Double Naught Spy Wrote:I am not a fan of ASC mags. After posting this video, I have had reports of the problem with other mag brands, but the issue seems less frequent than with ASC. I own about 15 ASC mags, BTW.
https://www.youtube.com/watch?v=0Axr5m1Daxc&t=1s
I bought 4 Elanders. I had a problem with them binding and hence failing to feed.
All of these are the 24-26 round mags, not 10 or 15 round mags.
What mags are you running these days?
What 6.5 Grendel Magazines Are Best? - Old Marine - 08-13-2022
ASC 10 rounders have been very reliable for me.
What 6.5 Grendel Magazines Are Best? - Gator08 - 08-15-2022
Ive had a few asc springs break on me. They start feeding weird, I open up the plate and the spring falls out in multiple pieces.
What 6.5 Grendel Magazines Are Best? - LRRPF52 - 08-17-2022
Ive been focused on the 12 Grendel for the past few years, which started in 2017.
So far, I have run 17rd Elander, 25rd CProducts, and 10rd Amend2 polymer mags.
Zero feeding issues or malfunctions of any kind, with the exception of when I shot it unsuppressed with 90gr TNT, which short-stroked the 12 CLGS system 3x. As soon as I attached the suppressor, the 90gr TNT ran like a raped ape across all 4 gas system settings from wide open to fully suppressed choke on the Bootleg Adjustable Gas carrier. 120-123gr ran fine unsuppressed and suppressed.
I have shot cases of 123gr American Gunner, a few hundred 120gr Federal OTM American Eagle, and am into my 2nd case of 123gr ELD-M.
Im mainly using the 25rd CProducts mags.
With the Amend2 mags, I loaded them up and left them in the rifle case for well over a year before I even shot those.
A caveat with any of my builds is that I go through an extensive build list relative to the bolt, chamber, barrel extension, gas tube, gas block, barrel fit to the upper, and buffer/recoil spring assembly.
For feeding, I de-edge, blend, and polish my feed ramps. I also make sure the ejector is rounded/chamfered and polished so that it doesnt bind against right side feed presentation from the magazine.
I also make sure the extractor isnt sharp-edged, to prevent binding during ejection, which is a problem for improperly-made extractors.
I dont just bash a bunch of parts together and hope for the best. There are decades of lessons-learned that go into how I approach the build process to set me up for success with reliability and accuracy.
What 6.5 Grendel Magazines Are Best? - dammitman - 09-04-2022
I have had to tig weld 2 of the Leanders due to spot welds letting go,,,,,
What 6.5 Grendel Magazines Are Best? - Turpentine - 01-11-2023
I like 17 round elanders but most of the time I use Duramag 10s. That said I modify every new mag I get whether its for me
or for a customer. They just work better afterwards and I dont get any feeding issues after Im done. Takes about 10 seconds. I havent had feeding issues in either of my Grendels personally but folks come to me with issues from time to time. Modifying the feed lip, particularly on the right hand side looking from behind the mag generally makes a difference. Plus a little polishing of feed ramps.
What 6.5 Grendel Magazines Are Best? - se3388 - 01-15-2023
I am using 10 round ASC and E-Lander mags and haven't had a problem with either. I am about to buy more E-Lander mags.
Steve...........