+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: INDUSTRY PARTNERS (https://65grendel.com/forumdisplay.php?fid=7)
+--- Forum: Rexus Outfitters (https://65grendel.com/forumdisplay.php?fid=37)
+--- Thread: SOLD OUT MONSTER Ultra-Lite Flash Suppressor (/showthread.php?tid=20988)
SOLD OUT MONSTER Ultra-Lite Flash Suppressor - Mad Charlie - 05-11-2020
Myself also.
SOLD OUT MONSTER Ultra-Lite Flash Suppressor - BluntForceTrauma - 05-12-2020
U P D A T E : These MONSTER Ultra-Lite three-prong flash suppressors go to nitriding tomorrow.
Three days in the mail to nitriding. Seven days in nitriding. Three days back to me. Let's call it two weeks until availability.
SOLD OUT MONSTER Ultra-Lite Flash Suppressor - BluntForceTrauma - 05-14-2020
U P D A T E : Got a bare metal "in-the-white" sample for my review before nitriding. Excited! See attached photo.
Thought I would weigh it: 1.6 ounces.
For comparison, a 5/8-24 A2 flash hider weighs 1.8 ounces (1/2-28 A2 weighs 1.9 oz).
LIGHTER than an A2 and three times as effective!
Interestingly, a MONSTER bolt weighs 1.5 ounces. So, almost same weight as a bolt!
SOLD OUT MONSTER Ultra-Lite Flash Suppressor - A5BLASTER - 05-14-2020
BluntForceTrauma Wrote:U P D A T E : Got a bare metal "in-the-white" sample for my review before nitriding. Excited! See attached photo.
Thought I would weigh it: 1.6 ounces.
For comparison, a 5/8-24 A2 flash hider weighs 1.8 ounces (1/2-28 A2 weighs 1.9 oz).
LIGHTER than an A2 and three times as effective!
Interestingly, a MONSTER bolt weighs 1.5 ounces. So, almost same weight as a bolt!
That's pimp as heck.
I would rock that thing even in the white like it is.
Wonder how well it will work on my 12 and 12.5 inch guns?
SOLD OUT MONSTER Ultra-Lite Flash Suppressor - biodsl - 05-14-2020
I just slid an 18" Monster barrel into a slick-side Aero upper. Guess what muzzle device it's gonna wear.
SOLD OUT MONSTER Ultra-Lite Flash Suppressor - tdbru - 05-20-2020
they back from nitride yet?
-tdbru
SOLD OUT MONSTER Ultra-Lite Flash Suppressor - BluntForceTrauma - 05-21-2020
Nope.
SOLD OUT MONSTER Ultra-Lite Flash Suppressor - 65GbySeven - 06-02-2020
Cost and outside diameter? I think these got deleted from your original post.
SOLD OUT MONSTER Ultra-Lite Flash Suppressor - Steamburn - 06-03-2020
BFT,
Any news on the Flash Suppressors?
SOLD OUT MONSTER Ultra-Lite Flash Suppressor - BluntForceTrauma - 06-04-2020
[INDENT]Gentlemen, Warriors, and Vile Unwashed Masses of the Grendel Horde, our MONSTER Ultra-Lite Three-Prong Flash Suppressor in 5/8-24 is here and IN STOCK.
Our MONSTER UltraLite Three-Prong Flash Suppressor is lighter than a standard mil-spec A2 flash suppressor (1.6 vs 1.8 oz for reference a bolt is 1.5 oz) and is much, much more effective.
Slim diameter of 0.740 allows installation of gas block even when flash suppressor is permanently installed. Installs via hand tightening or a tool when care is taken to not mar the finish. A drop of Loctite or similar compound may be used for a semi-permanent installation. Crush washer may also be used to time the orientation of the prongs, although with minimal flash overall it is not necessary. Crush washer not included.
Reduced flash prevents visual dazzle when employing one's weapon in low-light hunting and tactical situations and also reduces tell-tale flash signature. In test after test, three-prong flash hiders consistently outperform all other designs.
Black nitride finish for all-weather durability. Fits 5/8-24 muzzle threads. Diameter: 0.740. Length: 2.25. Weight: 1.6 oz.
Get lightweight effectiveness at SixFiveArms.com![/INDENT]
SOLD OUT MONSTER Ultra-Lite Flash Suppressor - biodsl - 06-07-2020
Just ordered two for my two Monster barrels. I almost forgot with all this 6 ARC brouhaha going on.
SOLD OUT MONSTER Ultra-Lite Flash Suppressor - stubshaft - 06-08-2020
I tried to order one and it stated that there were "no shipping options found". Please check on this or PM me so that I can order one.
Joe
SOLD OUT MONSTER Ultra-Lite Flash Suppressor - Steamburn - 06-08-2020
Ordered one. Thank you.
SOLD OUT MONSTER Ultra-Lite Flash Suppressor - D.Davis - 06-08-2020
BFT, I got mine. They look good and thread right up. Dave
SOLD OUT MONSTER Ultra-Lite Flash Suppressor - tdbru - 06-10-2020
BTF,
mine came in. Looks very good. well well machined. nitride finish is very even everywhere on the FS. threaded right up no problem. i took your advice. cleaned threads both barrel muzzle and FS. drop of blue loctite. hand tightened. looks so much better than swirly bird cage thingy that i took off.
thanks so much,
-tdbru
SOLD OUT MONSTER Ultra-Lite Flash Suppressor - BluntForceTrauma - 06-17-2020
MONSTER UltraLite three-prong flash suppressors are in stock and shipping.
You need muzzle devices for all those new builds, right?
Get a MONSTER! Lighter, at 1.6 oz, than the boring old A2, at 1.8 oz, and much, much more effective.
Looks cool, too.
SOLD OUT MONSTER Ultra-Lite Flash Suppressor - SDW - 06-24-2020
Posted this pic on different sub-forum. Here is mine on a BA 20" DMR barrel. Very smooth indeed. And a heck of a deal.
BTW, these might sell well in 1/2x28 thread size. Hint hint.
SOLD OUT MONSTER Ultra-Lite Flash Suppressor - Grendelshooter - 06-24-2020
SDW Wrote:Posted this pic on different sub-forum. Here is mine on a BA 20" DMR barrel. Very smooth indeed. And a heck of a deal.
BTW, these might sell well in 1/2x28 thread size. Hint hint.
Freakin slick.
Agreed on 1/2x28
SOLD OUT MONSTER Ultra-Lite Flash Suppressor - SDW - 06-24-2020
BluntForceTrauma Wrote:Or Advanced Armament Corp (AAC) has a tool if one wants to get fancy.
Somebody has to make a cheaper version of this tool. It's just too simple not to make and sell for a few bucks. It's not like a knockoff wouldn't work just as well. Could even be made of some kind of reinforced plastic.
Speaking of AAC.... I installed my Monster FH using one of their shims to time it, just for fun. The "green" shim, 0.012" thick, happened to be perfect to get my FH set with a slot at 12 o'clock, seen in my pic above. I know that flash suppressors are agnostic to barrel orientation, but there's something to be said for symmetry.
SOLD OUT MONSTER Ultra-Lite Flash Suppressor - BluntForceTrauma - 06-29-2020
SDW Wrote:Speaking of AAC.... I installed my Monster FH using one of their shims to time it, just for fun. The "green" shim, 0.012" thick, happened to be perfect
Excellent info. Thanks!