![]() |
|
6.5 staball powder work ups. - Printable Version +- 6.5 Grendel Forum (https://65grendel.com) +-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3) +--- Forum: 6.5 Grendel Ammunition & Reloading (https://65grendel.com/forumdisplay.php?fid=10) +--- Thread: 6.5 staball powder work ups. (/showthread.php?tid=20212) Pages:
1
2
|
6.5 staball powder work ups. - A5BLASTER - 01-06-2020 Ok so got out and ran the second ladder with staball today. Ran this one in .3 tenth increases, one round per charge, went up too 31.9 grains. Started at 25 grains. All rounds had been vibra settled when loaded and 31.9 grains had a lil crunch to it. Here is the data. 25-1730 25.3-1785 25.6-1813 25.9-1848 26.2-1859 26.5-1890 26.8-1896 27.1-1896 27.4-1920 27.7-1977 28-2018 28.3-2031 28.6-2067 28.9-2116 29.2-2148 29.5-2202 29.8-2212 30.1-2270 30.4-2276 30.7-2279 31-2272 31.3-2308 31.6-2324 31.9-2369 Plan on running some ladders with staball and the 85 trex bullets as well. 6.5 staball powder work ups. - 65GbySeven - 01-06-2020 Great data and thanks for sharing. Based on the speeds in Nosler's published data... a very crude deduction...Staball is the same as IMR4166 just ball versus extruded 6.5 staball powder work ups. - A5BLASTER - 01-06-2020 65GbySeven Wrote:Great data and thanks for sharing. Based on the speeds in Nosler's published data... a very crude deduction...Staball is the same as IMR4166 just ball versus extruded Don't know bout that never messed with are seen 4166 before. I will say this staball is very case filling lol. If you can't load to a min of 2.315 forget it you can't use this powder with the 129 ablr. Going to do a ladder are 2 with the lightest weight bullet I have. 85 Maker Trex. That way there us data at both ends of the spectrum. 6.5 staball powder work ups. - A5BLASTER - 02-08-2020 So bringing this back to live. Haven't run the 85 Maker yet but did run a ladder with this powder in PPU brass today with some 123 nosler CC. Started at 27 and worked up 1 round every 2 tenths to 31.8 grains. 27-1870 27.2-1864 27.4-1871 27.6-1912 27.8-1915 28-1941 28.2-1977 28.4-1982 28.6-2036 28.8-2041 29-2065 29.2-2094 29.4-2110 29.6-2132 29.8-2142 30-2196 30.2-2221 30.4-2235 30.6-2253 30.8-2262 31-2280 31.2-2348 31.4-2323 31.6-2314 31.8-2340 Seems like I had some bad throws from my chargemaster lite when doing this ladder. There was still plenty of room in the case for more powder. No pressure signs on the brass are primers and bolt lift was normal. I may load up a few more starting at 31 and work it up to 32.8 and see where it ends out at. Coal length for this load is 2.255. Looks like there could be promise with this powder with the lighter weight pills from say 123 and lighter, well maybe. 6.5 staball powder work ups. - Lemonaid - 02-08-2020 Appreciate the work you are doing, thanks. But shouldn't a 85 grain bullet be going in the 2900+ fps range at the top end? (using other suitable powders). 6.5 staball powder work ups. - Former Cav - 01-21-2023 Brownells has StaBALL 6.5 and StaBALL Match . https://www.brownells.com/reloading/powder/rifle-powder/staball-6-5-smokeless-powder-prod132913.aspx?trk_msg=5CA2BCJGVPOKVE1P22R8CPR8DO&trk_contact=URSAJE24PS7RGO9IV3Q6DEQ6UO&trk_sid=K20NRPL5NRC8J4PFAQ6RHIA1SG&trk_link=E24A4BTOVE941AJL7DMOKSU2FK 6.5 staball powder work ups. - Old Bob - 01-21-2023 Former Cav Wrote:Brownells has StaBALL 6.5 and StaBALL Match . https://www.brownells.com/reloading/powder/rifle-powder/staball-match-rifle-powder-prod147699.aspx 6.5 staball powder work ups. - Worstletter - 09-19-2023 Wow these are really nice results. I'm going to try 6*5 staball with 123gr and see how fast we can go. 6.5 staball powder work ups. - Worstletter - 11-08-2023 Well the results for 95gr vmax and 123gr eld are in and I would say no to 6.5 Staball in grendel. Shooting the Howa mini the 95gr only got up to 2400 fps with 32gr of powder. Accuracy was there but there's definitely better powders for that, same with the 123gr only got 2200 fps with 31gr. These were both loaded long to fill the case as much as possible. I can see this as a good powder for anything heavier but not for these typical loadings. O well. 6.5 staball powder work ups. - Legionnaire - 11-08-2023 Thanks for the report. Staball 6.5 is waaay down the list of optimum powders in QuickLoad. Varget is higher. |