+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel ARs and Other Semi-Autos (https://65grendel.com/forumdisplay.php?fid=8)
+--- Thread: AT3 FF-ML 20 Inch Faxon 6.5 Grendel Upper Range Result (/showthread.php?tid=18892)
Pages:
1
2
AT3 FF-ML 20 Inch Faxon 6.5 Grendel Upper Range Result - FLshooter - 07-28-2019
Good shooting.Once you find the bullet and load it likes.And that may take you some time.It will easily be a sub moa shooter.You’re not far now.
AT3 FF-ML 20 Inch Faxon 6.5 Grendel Upper Range Result - Scrape hunter - 09-11-2019
Jimla I have heard that cfe223 is very temp sensitive have you found this to be true with your testing ?
AT3 FF-ML 20 Inch Faxon 6.5 Grendel Upper Range Result - Jimla - 09-12-2019
Scrape hunter Wrote:Jimla I have heard that cfe223 is very temp sensitive have you found this to be true with your testing ?
I don't have temp sensitive problems at all in Hawaii, my hunting area and range only changes +/- 10 Degrees year round. CFE223 is know to be temperature sensitive and higher velocities. If you shooting at different temps(cold and hot), I would lose 50-100fps and focus on less sensitive powers like IMR 8208 XBR and AR COMP.
AT3 FF-ML 20 Inch Faxon 6.5 Grendel Upper Range Result - Jimla - 10-03-2019
I got a new lot of CFE223 powder, I tried a 10 shot Satterlee's load development and loaded the previous accurate load.
I was surprised how well 10 shot Satterlee's worked, it found my previous 30.8gr and 31.2gr nodes, see graph. At 30.8 it is at a bottom out in a flat area and at 31.2 it is a flat area with a sight drop of Velocity increasing .1 grains.
[ATTACH=CONFIG]14727[/ATTACH]
AT3 FF-ML 20 Inch Faxon 6.5 Grendel Upper Range Result - FRB6.5 - 10-03-2019
Jimla Wrote:I got a new lot of CFE223 powder, I tried a 10 shot Satterlee's load development and loaded the previous accurate load.
I was surprised how well 10 shot Satterlee's worked, it found my previous 30.8gr and 31.2gr nodes, see graph. At 30.8 it is at a bottom out in a flat area and at 31.2 it is a flat area with a sight drop of Velocity increasing .1 grains.
[ATTACH=CONFIG]14727[/ATTACH]
Nice to see some confirmation of that method.