[SIZE="3"]Well, that's news!

It's been reported that the upcoming Faxon Firearms ARAK-31 (.308 Winchester-length action) will be available in 6.5mm Creedmoor (http://www.all4shooters.com/en/specials/trade-shows-2015/SHOT-show-2015/rifles/faxon-firearms-arak31-xrs/), (http://www.facebook.com/FaxonFirearms/posts/544677105669392). And, that the newly redesigned ARAK-21 will sport left- and right-side ejection windows --- as does the new ARAK-31. All of which makes perfect sense, considering Faxon Firearms' plan to unveil a Bullpup lower receiver for its uppers, at some point in the future. Perhaps, something similar to this artist's sketch ---


[/SIZE]

Variable Wrote:Excellent news! I'm glad to hear it!

SHORT-N-SASSY Wrote:[SIZE="3"]Well, that's news!

It's been reported that the upcoming Faxon Firearms ARAK-31 (.308 Winchester-length action) will be available in 6.5mm Creedmoor (http://www.all4shooters.com/en/specials/trade-shows-2015/SHOT-show-2015/rifles/faxon-firearms-arak31-xrs/), (http://www.facebook.com/FaxonFirearms/posts/544677105669392). And, that the newly redesigned ARAK-21 will sport left- and right-side ejection windows --- as does the new ARAK-31. All of which makes perfect sense, considering Faxon Firearms' plan to unveil a Bullpup lower receiver for its uppers, at some point in the future. Perhaps, something similar to this artist's sketch ---


[/SIZE]

Evaris Wrote:"Artist sketch". Looks more like a FOSSCAD Hanuman 3D printable lower receiver render to me. Just saying.

KentuckyBuddha Wrote:Where is the recoil spring/tube going to go on that bullpup? That is a thinker.

[SIZE="3"]KB,

The Faxon Firearms ARAK-21 (.223/5.56x45mm NATO-length) and ARAK-31 (.308/7.62x51mm NATO-length) are gas-piston designs, requiring no buffer spring/tube extensions. These designs auto-load, within the confines of the Upper Receiver-Barrel Assembly ---





Accordingly, either represents a good candidate for incorporating within a short, compact Bullpup rifle.

Picture this winning combo: A compact, highly-efficient Bullpup rifle configuration, chambered for the short, highly-efficient 6.5mm Grendel cartridge!

NOTE: I found the accompanying photo to the Faxon Firearms Facebook Page, dated October 15, 2014 (Link given in my Reply #8, above), somewhat confusing. I therefore elected to use a similar image of a Bullpup Lower, sans an upper, found on the Internet (See my Reply #2, above).

[/SIZE]

SHORT-N-SASSY Wrote:[SIZE="3"] . . . And, that the newly redesigned ARAK-21 will sport left- and right-side ejection windows --- as does the new ARAK-31. All of which makes perfect sense, considering Faxon Firearms' plan to unveil a Bullpup lower receiver for its uppers, at some point in the future. . . .
[/SIZE]

Bwild97 Wrote:I heard a rumor that Faxon Firearms will be producing 6.5 Grendel barrels. So l called Faxon to see if the rumors are true and they are.

Faxon will be producing 6.5 Grendel barrels using a SAAMI spec reamer (I forgot to ask who's reamer) but was assured it was SAAMI spec. They will also be producing the ARAK 21 in 6.5 Grendel.

I asked if they would use the proper Grendel bolt and the answer was yes, for AR barrels. For the ARAK 21 they will be using their 7.62x39 bolt, which looks a lot like the "ARP" super bolt.

I'm glad to see more industry support for the 6.5 Grendel cartridge, I'm even happier to say that they are going to produce 6.5 Grendel before they produce the 6.8 SPC. Not that I have anything against the 6.8 it's just nice to see the 6.5 gaining support.

[SIZE="3"]To update:

I researched this newsy item, today, and came up with the following:

"Currently, 5.56, 300 BLK, and 7.62x39 are available and shipping. The next caliber will be 6.5 Grendel. . . ." --- (http://www.faxonfirearms.com/t/faqs) (Approx. halfway down the Page);

(http://www.guns.com/2015/02/24/faxons-got-new-7-62x39mm-and-fully-ambidextrous-araks/) --- Compare the Faxon Firearms ARAK-21 5.56mm Bolt with their 7.62x39mm Bolt (left), which will be used with the upcoming 6.5mm Grendel chambering ---



It's obvious Faxon Firearms has done their homework. And, though their ARAK-21 barrel assembly is not free-floating, there's a potential for sub-MOA accuracy ---



And, from a Bullpup Enthusiast's perspective, picture a 6.5mm Grendel ARAK-21, with a 20" barrel, mounted to a lightweight Bullpup lower, with an overall rifle length, under 30" !
[/SIZE]

SHORT-N-SASSY Wrote:[SIZE="3"]. . .
And, from a Bullpup Enthusiast's perspective, picture a 6.5mm Grendel ARAK-21, with a 20" barrel, mounted to a lightweight Bullpup lower with an overall rifle length under 30"!
[/SIZE]

SHORT-N-SASSY Wrote:[SIZE="3"]To update:

I researched this newsy item, today, and came up with the following:

"Currently, 5.56, 300 BLK, and 7.62x39 are available and shipping. The next caliber will be 6.5 Grendel. . . ." --- (http://www.faxonfirearms.com/t/faqs) (Approx. halfway down the Page);

(http://www.guns.com/2015/02/24/faxons-got-new-7-62x39mm-and-fully-ambidextrous-araks/) --- Compare the Faxon Firearms ARAK-21 5.56mm Bolt with their 7.62x39mm Bolt (left), which will be used with the upcoming 6.5mm Grendel chambering ---


[/SIZE]

[SIZE="3"]
To Faxon Firearms: It's been more than two years (03-01-2015), since I submitted the above Post. I need an ARAK-21 pistol, with the 12.5" barrel, chambered for the 6.5mm Grendel cartridge, using the beefy 7.62x39mm Bolt ---


Thank you.
[/SIZE]