+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Photo Gallery (https://65grendel.com/forumdisplay.php?fid=16)
+--- Thread: My First grendel build (/showthread.php?tid=20080)
My First grendel build - mel - 12-02-2019
built my first 20" grendel and thinking about doing a 24 inch build later on , im mostly just a target shooter with a lil hunting now and then
still a work in progress at this point , i have a matching skeletonized lower i need to put on among some other anodized parts
![[Image: blFkJBt.jpg]](https://i.imgur.com/blFkJBt.jpg)
my long range/day setup is an ade 6-25x56 scope
and my night setup is an atn x sight pro 4k 5-20 with a sniper hog lights coyote cannon illuminator
heres 1150 yards with the atn x sight on it
https://www.youtube.com/watch?v=ALYtlp8nCrg
and 500 yards with the same setup
https://www.youtube.com/watch?v=eyA1ewJC-8Y
anything past 1400 with the atn just gets to blurry when i zoom in
ive shot the same and further with the ade 5-25 just cant record video like i can with the atn need to pick up one of those target camera setups
been shooting hornaday black eld-m out of it does pretty good
![[Image: nPtHHLE.jpg]](https://i.imgur.com/nPtHHLE.jpg)
the 2 lil targets was me trying out some wolf steel cases
My First grendel build - CJW - 12-02-2019
Very nice
My First grendel build - diddlyv - 12-02-2019
That's how mine shoots with wolf and decent ammo from an Odin barrel. Good Job love the purple
My First grendel build - mel - 12-02-2019
diddlyv Wrote:That's how mine shoots with wolf and decent ammo from an Odin barrel. Good Job love the purple
yeah at 5 bucks and some change a box of the wolf i had to try it , eventually ill be loading my own but for now with as good as the black eld-m has done im happy with it till i can pick up dies and everything else i need to reload.
i shot that group right after sighting in the atn scope , can cut the size of it almost in half with the normal glass scope
ive got the rest of the purple parts coming , dust cover , forward assist , safety, mag catch/release and trigger guard.I may take the purple gas block off and switch to an adjustable black block and have the barrel done n a matching purple gun candy to even out the color from front to rear
TY
My First grendel build - mel - 12-08-2019
got to shoot a lil today , mostly was working on my boss,s 5.56 but i grabbed my grendel and shot 10 rounds at 186 yards
![[Image: de18RvD.png]](https://i.imgur.com/de18RvD.png)
the moment i squeezed the trigger i knew i pulled that one shot (top left), was the very first shot of the 10 round group cant wait till my new trigger gets here been using a cheap crappy milspec trigger
shot with hornaday black eld-m
My First grendel build - USNavy06 - 12-17-2019
Wow looks good! What barrel did you end up using? Im currently building an upper and cant decide on a barrel.
My First grendel build - mel - 12-18-2019
ty its a 20 inch wilson barrel
been playing with some reloads with eld-m 123g bullets with 4895 powder shoots just as good as the black eldm so far
couldnt get my hands on any 8208 so i ordered some power pro varmint to try out with some lighter bullets
My First grendel build - mel - 12-18-2019
![[Image: D8gpCIr.jpg]](https://i.imgur.com/D8gpCIr.jpg)
forgot i had a new picture with one of the ir setups on it
one of these days ill finish my skeletonized lower and put the rest fo the purple anjodized parts on , probably when my new single stage 3lb trigger arrives late this week
My First grendel build - mel - 12-20-2019
got to test some handloads today and
26g of 4895 got me a rounded 2400fps average pushing 123g eldm's out of the 20 inch barrel
27g of the same got me a rounded average of 2525fps and had a much better group but starting to show slight pressure signs so cant push them any harder
factory hornaday black eldm had an rounded average of 2600fps
so im done with trying the 4895 in the grendel, on tuesday my new powder will be here and ill start on some loads with it
My First grendel build - mel - 12-21-2019
[ATTACH=CONFIG]15123[/ATTACH]
5 shot group with first shot flier on the left
My First grendel build - PNWTargets - 12-21-2019
Thanks for the posts of pics and info!
My First grendel build - mel - 12-21-2019
finally got around to pulling the video , but ended up converting it wrong so no sound and its a lil blurry
https://www.dropbox.com/s/ptysq00ezitx9zl/New%20video.mp4?dl=0
My First grendel build - mel - 12-23-2019
picked up my new triggers
and got them installed
![[Image: Y6VGYr2.jpg]](https://i.imgur.com/Y6VGYr2.jpg)
![[Image: ZwhbhW6.jpg]](https://i.imgur.com/ZwhbhW6.jpg)
My First grendel build - mel - 12-24-2019
im loving the hell out of this atn scope
got all my balistics info in got the weather/wind stuff setup , lasered the gong at 537y and it was dead on
https://www.youtube.com/watch?v=0qoMaRumgwk
gota get used to my new trigger , today with the wind really wasnt the day i should have been out trying it damn wind was blowing me around lol
My First grendel build - mel - 01-13-2020
friend made me a nice para cord sling for the grendel
![[Image: R2TTK5T.jpg]](https://i.imgur.com/R2TTK5T.jpg)
My First grendel build - Kswhitetails - 01-13-2020
Looking at your build, and seeing the triggers, if you don't put a KState Wildcat sticker on that I'll be offended.
Nice work sir.
My First grendel build - mel - 01-14-2020
Kswhitetails Wrote:Looking at your build, and seeing the triggers, if you don't put a KState Wildcat sticker on that I'll be offended.
Nice work sir.
ty , still working on it , ill have my skelotinized lower ready to go on the gun in the next week or so , and then i can put on the rest of the anodized parts on it , if i could stop shooting the darn thing id have the barrel off and send it out to get done in a matching purple , that might happen now that ive been playing with my new creedmoor , and ccw gun i picked up this week
sorry no stickers lol
My First grendel build - xd9c45 - 01-14-2020
That's a nice "showing" of the 6.5 G. Good shootin', sir.
My First grendel build - mel - 01-14-2020
ty i cant wait to get this all finished up and start on my 28 inch build i think ive got my parts list nailed down pretty well for that build , just gota start getting those parts comming
My First grendel build - Kswhitetails - 01-15-2020
mel Wrote:sorry no stickers lol
I'm offended.
I've never been a fan of the Skeletonized parts. Especially the grips. It looks like a hamburgerfist maker. (Say it in Colonel Huntgerschmidt's waffen accent) I find the ability to make the AR truly yours and unique is one of it's most endearing assets. No two must be alike, though we try to copy what we like.
I'm glad you're almost done, there's a really great moment when a build finally comes together as intended. I call it the "done" moment, even though we all know no build is ever truly done...