+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Bolt Actions & Single Shots (https://65grendel.com/forumdisplay.php?fid=17)
+--- Thread: Bell and Carlson Howa Mini "Sporter" rifle stock. Update (/showthread.php?tid=19844)
Pages:
1
2
Bell and Carlson Howa Mini "Sporter" rifle stock. Update - Gunner75 - 10-30-2019
Ok fellas, figured I'd give you all a heads up. DO NOT PHONE into the shop until it is available on our website. I'm still hearing about the last one.
Should be available within the next couple weeks.
http://www.bellandcarlson.com
I took our M40 Heavy barrel model, recontoured the for end and changed the grip angle and size. The buttstock has the same general look/styling.
This stock accomodates the sporter barrel contour. I did however leave enough material so the consumer could open the sporter stock up to the heavy barrel.
The heavy barrel version fits but the barrel contacts all the way down the channel. Won't take much to float it.
Hope you like it.
Bell and Carlson Howa Mini "Sporter" rifle stock. Update - A5BLASTER - 10-30-2019
Outstanding sir. Good to see more options.
PM me please sir. I have a few questions about y'alls cz 527 stocks?
Bell and Carlson Howa Mini "Sporter" rifle stock. Update - ricsmall - 10-30-2019
Thanks gunner! Can’t wait till it’s available. Thanks also for putting out new product for the ‘niche’ crowd
Bell and Carlson Howa Mini "Sporter" rifle stock. Update - jason miller - 10-31-2019
Any idea how much they weigh? Still have the full-length bedding block?
Bell and Carlson Howa Mini "Sporter" rifle stock. Update - Gunner75 - 10-31-2019
Full block, weight is undetermined at this time. We are still in the layup process.
Bell and Carlson Howa Mini "Sporter" rifle stock. Update - HokeyPokeyKid - 10-31-2019
Nice! I guess I'm getting another stock for my 7.62x39 as well.
Bell and Carlson Howa Mini "Sporter" rifle stock. Update - JSH - 10-31-2019
Glad to see more options for the Mini?s. I will wait till pics are up to ask questions.
This put me on hold for a new stock again after debating which way to go.
Bell and Carlson Howa Mini "Sporter" rifle stock. Update - Gunner75 - 11-05-2019
Should be online in a few hours.
[ATTACH=CONFIG]14903[/ATTACH]
Bell and Carlson Howa Mini "Sporter" rifle stock. Update - Gunner75 - 11-05-2019
Inventory should be uploaded later today???
http://www.bellandcarlson.com/index.cfm?fuseaction=category.display&category_ID=1146
Bell and Carlson Howa Mini "Sporter" rifle stock. Update - grayfox - 11-05-2019
Gunner, the Ruger RAP grendel, your sporter style stock... Ruger predator grendel is now an AR mag, does B&C have a way to allow that in your RAP sporter stock?
Bell and Carlson Howa Mini "Sporter" rifle stock. Update - Gunner75 - 11-05-2019
Not at this exact time gray fox but we are working on a lot of new products and Ruger is getting a lot of discussion.
Bell and Carlson Howa Mini "Sporter" rifle stock. Update - grayfox - 11-05-2019
I do like that Ruger has listened to its shooting community re: the predator.
Rootin' for you guys too.
Bell and Carlson Howa Mini "Sporter" rifle stock. Update - Msalm - 11-11-2019
Well I couldn?t stand it...ordered one in green with black web. Hope it is scaled down enough to retain the best part of these rifles as in trim and lightweight
Bell and Carlson Howa Mini "Sporter" rifle stock. Update - grayfox - 11-11-2019
Gunner75 Wrote:Not at this exact time gray fox but we are working on a lot of new products and Ruger is getting a lot of discussion.
Here's a wild thought... maybe the Boyd's AR-accessory bottom metal might work in your B&C stock? Since both companies have to match the Ruger bottom setup... I'd be willing to try it for you if you supply some parts... I have a Ruger grendel coming in soon.
Bell and Carlson Howa Mini "Sporter" rifle stock. Update - Gunner75 - 11-13-2019
[ATTACH=CONFIG]14938[/ATTACH]
Bell and Carlson Howa Mini "Sporter" rifle stock. Update - Gunner75 - 11-13-2019
Interesting, I check that out and be in touch. I've got a week of backlog, but I'll take a peek at it in the meantime.
Bell and Carlson Howa Mini "Sporter" rifle stock. Update - 1075 tech - 11-14-2019
Gunner75 Wrote:[ATTACH=CONFIG]14938[/ATTACH]
That's awesome. I recently got the M40 stock for my heavy barrel. Love it! Dropped in. Tight fit around the action and bottom metal. Barrel fully floated. No fitting needed. Tightened the action screws to 50 in lbs. Sub-MOA potential with factory loads right out of the box.
Bell and Carlson Howa Mini "Sporter" rifle stock. Update - Msalm - 11-14-2019
Just received my sporter stock today, had a 7.62x39 barreled action sitting on the shelf so bolted it in and function checked 4 rounds loaded with 125 Sierra SP?s through the mag. Fed slick as a whistle and feels really good in the hands. I think after mounting a scope it will feel a touch heavier than wanted but overall it?s a damnded nice stock. I like the cleaner lines of these newer B&C vs the older ?muted? contours of some of the older stocks. Trimmer through the forend and pistol grip with crisp contour lines, it?s a sharp looking stock. It?s not as light as a premium hand laid stock (High Tech, Brown Precision, etc) but then it?s not $600 either.
Overall two thumbs up!
Bell and Carlson Howa Mini "Sporter" rifle stock. Update - tdbru - 12-30-2019
Gunner75,
just ordered the mini action stock for my mini 1500 6.5G. you were out of stock on the Desert Tan, so i ordered olive with black spiderwebs. will any kind of paint stick well, like most rattle can paints? and how are the recoil pads attached. if i want to lengthen the pull by putting in a 1/4" spacer, is the pad glued on or screwed on?
thanks again.
-tdbru
Bell and Carlson Howa Mini "Sporter" rifle stock. Update - Gunner75 - 12-30-2019
tdbru, FYI if we are every out of stock, we usually can ship the stock of your choice within a couple business days. Paint and paint prep. Wipe all towel with a little 91% alcohol and wipe over the complete stock and follow up with a dry towel. Just not good practice to allow solvents to hang out on painted surfaces so that is why I suggest following up with a dry towel right away. It won't hurt our finish, simply remove any finger prints, contaminates, etc. Paint away. I've never really ran across a paint that would not adhere to our finish.
Recoil pad. It is Glued and Screwed into place. You will destroy the pad by removing it.