I'm in. I'll be sending PP shortly.
CLOSED Faxon 12" 6.5 Grendel Group Buy $155 + S&H
Collapse
X
-
I am in, paid, and looking forward to building my first AR, and first Grendel, did a lot of caliber research before going with the 6.5, and this GB had perfect timing.
It'll be a big step up from my factory Springfield Saint.
This is also my first post, Hello Grendel Horde.
Comment
-
-
Hey, guys, finally getting around to laying out the "surprise" I mentioned earlier. Been dreaming of doing this and finally made it happen. These barrels will feature a new reduced-size rifling profile that is long overdue in the hide-bound shooting industry.
Consider that each rifling land in a .223 barrel is 0.0025 tall, and each rifling land in a .243 barrel is 0.003 tall. After that, industry standards specify 0.0035 lands for .250, .270, and .280 barrels. Both .308 and the mighty .338 share lands 0.004 tall.
Now, what do you suppose the industry specifies for .264 barrels? Obviously, since it falls between the .250 and .270 it shares their 0.0035 land-height, right? Surely, this amazingly efficient caliber wouldn't share the same 0.004 lands with the monstrous .338, would it? Oh, yes, it would! The firearms industry traditionally specifies lands 0.004 high for .264 barrels. This makes zero sense. Are 6.5mm bullets driven any harder than .25-06 bullets? Do 6.5mm bullets need rifling more aggressive than .270 Winchester bullets? No, my friends, no. This is madness.
Consider the mild-mannered 6.5 Grendel cartridge. Yes, a thing of ballistic beauty, of martial magnificence. If the 6.5 Grendel, launching bullets at moderate velocities at pressures of 50,000 psi, supposedly "needs" lands as aggressive as the .338 at 62,000 psi, then how is it the 5.56 with 0.0025 lands and the .243 Winchester with 0.003 lands — both blasting bullets at high velocities and pressures around 58,000 psi — manage to thrive?
Verily, Gentlemen, Esteemed Warriors, and Vile Unwashed of The Horde, these Faxon group buy barrels will pioneer 5R-EE (Easy Engraving) rifling with lands 0.003 tall.
Easy Engraving, with its reduced lands, minimizes the bullet jacket deformation of more aggressive lands, leading to more-pristine bullets making their way downrange. This is a good thing. Rifling is a necessary evil — technically, a bore obstruction. Ideally, our barrels would be smoothbores, launching slippery bullets in brand-new condition.
Additionally, Easy Engraving opens up new opportunities to the handloader, who can take advantage of the reduced friction required to engrave bullets into the rifling, experimenting with the powder burn-rate/pressure dynamic in the quest for more velocity within safe pressures. This could get interesting!
Easy Engraving is now here. Finally. Exclusively for The Horde. Let the 6.5mm world sit up and take notice.:: 6.5 GRENDEL Deer and Targets :: 6mmARC Targets and Varmints and Deer :: 22 ARC Varmints and Targets
:: I Drank the Water :: Revelation 21:6 ::
Comment
-
-
I went with the TBAC flash hider (which pushes the mounting surface out to the end of the threaded portion of the barrel) and the 2A BL-Rail which has an actual length of 11.87". Definitely cutting it close (won't know how close until the barrel is here) but I've other uses for the handguard if it's too tight.
Updated drawings with lengths in addition to the widths would make this a bunch easier to figure out.
Comment
-
-
I have a Parallax Tactical 11.5" rail from a previous build that will fit perfectly. I had it on a 12.0" 300blk and with the SiCo specwar FH, my Omega cleared the rail by MAYBE 1/10". I've sold the 300blk, so now that's how this 6.5 SBR upper will be set up.
Comment
-
Comment