I apologize if there is a thread out there that I missed (I promised I searched), but I'm trying to decide between a 5-9" bipod and a 7-13" bipod. I don't see a lot of prone in my future .. mostly shooting from a bench. I've only had a bipod on one other rifle and it was a .300RUM .... so the led sled got a lot more play than the bipod. What are the things I should be thinking about as I make this decision?? I know it probably comes down to personal preference, but just looking for some help with the decision.
5-9" or 7-13" bipod??
Collapse
X
-
I have both but for bench shooting I prefer the 5-9. Where I usually shoot at my house I'm shooting into a natural ravine. The shorter bipod allows me to keep the stock of the rifle lower to the table and I don't have to use as many sand bags under the stock or pistol grip. If your shooting on an incline the taller bipod might be advantageous. Even when shooting at targets that are close to the same plane as the rifle on the bench I prefer the shorter bipod. I'm using a Harris bipod attached to a sling swivel stud. If your using an adapter to a quad rail this might raise the front of the rifle even more.
Comment
-
-
An alternative to deciding between the 5-9" and 7-13" is going with an Atlas bipod. The tips on the legs are removable which allows a 1/2 dowel rod to be inserted in the legs of the bipod to give you lots of height options. I put 3' wood dowels in the Atlas and set in a camp chair on flat ground and use the bipods as an impromptu bench and when I'm on a steep slope trying to get steady to shoot across a canyon.
The pic shows dowel rods about a 8" long for use in tall grass
JackAttached Files
Comment
-
-
Originally posted by Jackem View PostAn alternative to deciding between the 5-9" and 7-13" is going with an Atlas bipod. The tips on the legs are removable which allows a 1/2 dowel rod to be inserted in the legs of the bipod to give you lots of height options. I put 3' wood dowels in the Atlas and set in a camp chair on flat ground and use the bipods as an impromptu bench and when I'm on a steep slope trying to get steady to shoot across a canyon.
The pic shows dowel rods about a 8" long for use in tall grass
Jack
Thanks!
Comment
-
-
Originally posted by BigBC View PostQuick question. Have you used full size mags with the Atlas? I'm concerned that in the prone position I will have to raise the bipod up to clear the mag from the ground and that it will be an un-comfortable "cobra" shooting position. Does everyone pretty much go with 10-15 round mags just to keep the rifle as close to the ground as possible? I guess that would make sense since 25 rounds would be most effective in a combat environment vs. what most people use it for. JW what your thoughts on that are.
Thanks!
Comment
-
-
For precision work or on relatively stationary targets (pdogs, etc.), I use the Harris 6-9" notched bipod. (Low is stable.) For calling or stalking, I use the Harris 12-25" or a set of shooting sticks. I've not yet found the perfect bipod for all occasions, but these two activity types are fairly easy to plan for in advance.If it's true that we are here to help others, then what exactly are the others here for?
Comment
-
-
Originally posted by Jackem View PostNo, and I don't believe there would be much clearance with a 30 rounder without some extensions. I got the bipods as part of a package so I didn't experience the pain of buying them separately. I get a lot of use out them since making a leather cap that fits over the head of them so they work with my binoculars, which ends up be more than being mounted on a rifle.
Comment
-
-
I bench shoot with a bipod because I feel its more realistic to hunting. Bags are definitely more stable but its apples and oranges. I like taller because I'm not crouched so much which inhibits smooth breathing, but again less stable. I just talked in a circle, so I ultimately think personal preference works best
Comment
-
Comment