Trying to decide between an ace skeleton stock and a magpul moe rifle stock. What would you choose?
Stock options?
Collapse
X
-
I haven't used either, but I've been interested in the ACE stocks. I would of used it on my current build if I hadn't bought a lower that already had a good stock. My next build will likely have their socom stock.
With the Ace you've got a small, lightweight stock that allows you to use a rifle buffer system.
I'm not comfortable using a collapsible stock were I can't lock it into the position I have it."Those who sacrifice liberty for security, deserve neither." Benjamin Franklin
Comment
-
-
I've had both on my Grendel. The ACE is lighter and quieter from a hunting standpoint. The MOE will accept a rail on the bottom for a rear monopod and also an adapter socket for a side mounted swivel (both are an additional expense). The butt pad that comes with the MOE is hard plastic... no padding and kind of slick if you are propping the rifle up in the corner somewhere it tends to slide. I replaced mine with a thicker pad to increase LOP. I like em both and am currently running the MOE.
Comment
-
-
Originally posted by 500 View Post
Go ACE..... Here is my latest Presentaion Grade Setup with a 16" Grendel Barrel, Seekins Lower and Meg Arms SBU. I plan to use this for my Lilja buy barrel set up. You can do so much with an ACE.
Comment
-
-
Originally posted by Tedward View PostI wouldn't give Stag my money.
Go ACE..... Here is my latest Presentaion Grade Setup with a 16" Grendel Barrel, Seekins Lower and Meg Arms SBU. I plan to use this for my Lilja buy barrel set up. You can do so much with an ACE.
[ATTACH=CONFIG]3912[/ATTACH][ATTACH=CONFIG]3913[/ATTACH]
WOW! That looks really good! That's about all the convincing I needed.
Comment
-
-
I got the idea from JP Rifles Presentation Grade. They want $599 for that option. I had to make jigs out of wood to hold the parts then milled the surfaces to remove the anodized finish. Not as easy as it looks but took it to 2000 grit wet sand paper. Then polish, it is like a mirror.
I also use the not so perty for my Beowulf and other Grendel but is also awesome. You have so many options with DuraCoat or Cerakote and aluminum I don't like using plastic.
Also notice the deep engraving "LOKI with image" I had done by my friend. I'm going to have the Grendel Logo on the top of the Forum put in the opening on this lower. Pictures to follow soon, we'll it might be around Christmas, depends on the money situation....Last edited by Tedward; 09-28-2013, 03:08 AM.
Comment
-
-
Originally posted by JohnOD View PostMy 6.5G on top and 458SOCOM below
The ARFX is really too light to balance out that 20" barrel & comp
They both looks nice too.
Also how do you get your pictures to post so big???
Comment
-
Comment