Does anyone here have any experience using these in a Grendel?
RUBBER CITY ARMORY - M16 Black Nitride Bolt Carrier Group
Collapse
X
-
Alright so on there website a carrier, firing pin, and cam pin was only $122 shipped with a lifetime warranty, so I pulled the trigger. I figured at that price with a lifetime warranty why not give it a try.
It looks like my research thread just got redirected to a comparison and analysis thread. I'm running a black phosphate carrier in my PF Grendel and a Spikes black phosphate carrier in my 5.56. I'll do my best to do a comparison to them.
If anyone here has any experience with them please do add to this thread please. Especially if you're running a boron carrier you can compare it too.
Bwaites, LR1955, etc If this type thread belongs elsewhere please feel free to move it there.
Note: Their website states that "RCA has developed a revolutionary treatment eliminating the need for oil or grease on tactical components for the life of the weapon."
Just because you can do something doesn't mean you should. I have no intent to run this carrier dry. I've put no weight on the oil free function when I chose this carrier."Those who sacrifice liberty for security, deserve neither." Benjamin Franklin
-
-
Ordered on 07/22, in hand 07/25. It's hard to complain about that.
Their website didn't have an option for a retaining. I replied to my order confirmation asking if I could also buy a retaining and explained that I was buying the parts for a Grendel build. They replied quickly that it'd be no problem, that they'd throw one in (no charge). Not exactly an expensive part, but I did appreciate the gesture."Those who sacrifice liberty for security, deserve neither." Benjamin Franklin
Comment
-
-
Will do ricsmall. It may be quite a bit longer before I'm able to give analysis results. If you've seen my other post you know I'm not going to be able to get my barrel as soon as expected"Those who sacrifice liberty for security, deserve neither." Benjamin Franklin
Comment
-
-
damn, for that price, you could have got yourself a Primary Weapons DI carrier.
Primary Weapon Systems
It's Salt Bath Nitride (aka Melonite) treated too.
Comment
-
-
Originally posted by Rambozo View Postdamn, for that price, you could have got yourself a Primary Weapons DI carrier.
Primary Weapon Systems
It's Salt Bath Nitride (aka Melonite) treated too.
Comment
-
-
Alright, so I'm about to have a Grendel build ready to rock one of these RCA carriers. I thought I'd start a little comparison to other carriers I have on hand. I've started with OAL and weight, as I'm still not ready for live use.
All carriers had an OAL of 6 11/16", measuring with a construction measuring tape. My calipers weren't able to accommodate them.
RCA - 9.38 oz
Precision Firearms phosphate used - 9.63 oz
Spikes Tactical Phosphate new - 9.45 oz
Spikes Tactical Phosphate used - 9.45 oz
Hopefully, I'll be testing operating performance soon."Those who sacrifice liberty for security, deserve neither." Benjamin Franklin
Comment
-
-
I'm still doing long-term durability, reliability, and function-testing on different BCG's dating back to 2007, in Arctic through hot-wet annual cycles. They include:
* Standard Mil-spec 8620 carrier with correct chrome-lined gas gey
* Titanium Nitride (TiN) plated BCG, including the bolt
* Nickel Boron (NiB) plated BCG, including bolt
So far, no reliability differences that have stuck out. All guns have been lubricated during high-volume shoot sessions. The TiN seem to acquire a burnish from hot gassing, and the NiB does to a lesser extent as well. Lubricity goes to the NiB favor, although no reliability differences have been noted.
The ferritic nitrocarburized (melonite) bolt carriers seem to be somewhere between TiN and NiB from just a subjective observation so far, although I didn't have any to start testing with in 2007.
More important with the Bolt Carrier is the dimensional uniformity and adherence to standards, especially with regard to inner bore ID's where the bolt inserts into the carrier. The tail of the bolt must have a good seal with the hole it penetrates through in order to have a proper gas seal for the circuit, but modern Total Quality Management standards seem to have weeded out the reject carriers that were too large in the bolt tail hole.
Comment
-
-
Originally posted by LRRPF52 View PostI'm still doing long-term durability, reliability, and function-testing on different BCG's dating back to 2007, in Arctic through hot-wet annual cycles. They include:
* Standard Mil-spec 8620 carrier with correct chrome-lined gas gey
* Titanium Nitride (TiN) plated BCG, including the bolt
* Nickel Boron (NiB) plated BCG, including bolt
So far, no reliability differences that have stuck out. All guns have been lubricated during high-volume shoot sessions. The TiN seem to acquire a burnish from hot gassing, and the NiB does to a lesser extent as well. Lubricity goes to the NiB favor, although no reliability differences have been noted.
The ferritic nitrocarburized (melonite) bolt carriers seem to be somewhere between TiN and NiB from just a subjective observation so far, although I didn't have any to start testing with in 2007.
More important with the Bolt Carrier is the dimensional uniformity and adherence to standards, especially with regard to inner bore ID's where the bolt inserts into the carrier. The tail of the bolt must have a good seal with the hole it penetrates through in order to have a proper gas seal for the circuit, but modern Total Quality Management standards seem to have weeded out the reject carriers that were too large in the bolt tail hole.
Comment
-
Comment