Faxon muzzle thread?

[Howling Coyote]

I'm looking at purchasing a Faxon 16" Gunner Grendel barrel. Brownell has a pretty good deal right now on them. I'm concerned that the specs for this barrel are incorrect but I could be wrong and wanted to get some advise from you guys.
I did call Faxon but no answer so I sent them a email explaining the situation. That was 3 days ago and no response.
This has to do about muzzle thread pitch.
Brownell specs. 1/2-28 tpi
Faxon specs. 5/8-24 tpi

Do Brownell barrels come from Faxon with a 1/2-28 muzzle thread pitch or does Brownell's web site have it listed incorrect?
Thanks Guys

[mongoosesnipe]

my group buy faxxons were 5/8-24

additionally i have a brownells stainless 18 inch that has 5/8-24 threads that said they could have spec for a differnt thread on a new order but i would call to inquire

[BluntForceTrauma]

I'm betting Brownells is simply a typo. Faxon uses 5/8 for 65G.

[Howling Coyote]

I just emailed Brownells about this so I'll post back to this site their answer.

[CastleBravo]

I should be getting mine from Brownells next week. I suspect it will be 5/8x24.

[grayfox]

I'm looking at purchasing a Faxon 16" Gunner Grendel barrel. Brownell has a pretty good deal right now on them. I'm concerned that the specs for this barrel are incorrect but I could be wrong and wanted to get some advise from you guys.
I did call Faxon but no answer so I sent them a email explaining the situation. That was 3 days ago and no response.
This has to do about muzzle thread pitch.
Brownell specs. 1/2-28 tpi
Faxon specs. 5/8-24 tpi

Do Brownell barrels come from Faxon with a 1/2-28 muzzle thread pitch or does Brownell's web site have it listed incorrect?
Thanks Guys

I looked there myself, thinking maybe by chance you mistook a 223 barrel for the 6.5... well Brownell's says in 2 places that their grendels are 1/2-28!!
Gotta be a typo but best to, as you're doing, definitely verify what's what before plunking down the coin.

Maybe you could call the Big B or go to online chat with them...

1/2x28 is common for the 223 barrels...

[Howling Coyote]

The main reason for the question is that the basic A2 flash hider that I'm wanting to use has a 5/8-24 thread pitch due to it being the 30 cal one. From what I understand the 30 cal one must be used, is that correct? The 30 cal A2 that Brownell's list is 5/8-24 tpi but the barrel states 1/2-28 tpi.
Thanks

[bj139]

From Faxon website lists 5/8-24 tpi for Match Series.
The barrel photo on the Brownells site shows Match Series so they must be the same barrel.

http://faxonfirearms.com/match-series-16-gunner-6-5-grendel-416r-5r-nitride/

https://www.brownells.com/rifle-parts/barrel-parts/rifle-barrels/barrel-6-5-grendel-16-mid-length-black-sku100026119-108068-202703.aspx

The proportions of the muzzle photo on Brownells indicate the barrel is 5/8".

[smf]

I bought this barrel a few weeks ago from Brownell's when they came in stock. It is definitely 5/8-24.