Who's got a Grendel SBR

[Snew]

Our search function sucks. It thinks 3 characters is too short.

I've got a 16" coming that I'm goign to cut down. I was going ~10.5 so my suppressor will but up about 1/16" from the end of the handguard I've got but I'm considering another handguard so I could go 11 or 12". I know inches are free velocity but I'm firmly in the shorter is better camp.

• What length barrel did you go with and why that length?
• Do you wish you'd gone shorter?
• Wish you'd gone longer?

[LRRPF52]

I would look more at getting the dwell time you need for reliability, so when I look at SBR's, I prefer the 11.5" or 12" with 5.56 guns. Since the Grendel uses a larger gas port diameter on the Mid-length 16" pipes, I'm thinking more dwell time is better, regardless of port diameter, since shorter dwell time lengths need high-impulse via large gas ports to run reliably. I also like rifle-length handguards with floated suppressors underneath.

Is the 16" you have coming already drilled at mid-length for the Grendel? That could be a problem for SBR lengths...

[txgunner00]

I am interested in building a 6.5 SBR. Who makes factory 10-12" barrels?

[warped]

Templar does

[txgunner00]

Thanks- their web site seems on the fritz. It freezes if you try to click on anything. I'll give them a call.

[Snew]

Is the 16" you have coming already drilled at mid-length for the Grendel? That could be a problem for SBR lengths...

Sadly, it is. Now I'm looking at 12-13" for my SBR or calling Templar and seeing what he can do for me.

Decisions, decisions.