Why isn't anyone building off of a Zastava M85? It's 7.62x39 would work wouldn't it. Someone tell me before I buy one and find out later I regret it.
Zastava M85
Collapse
X
-
Yes, it has been done. http://www.65grendel.com/forum/archi...hp/t-2386.html
Originally posted by adamjp View PostMy 6.5 Grendel is built on a Zastava m85. The manufacturers name for actions sold as Mini Mark X Mausers, Remington 799s or similar.
I started with an action designed for the 7.62x39. Barrel is a PacNor #3 cut to 21inches long.
The only modification that you need to make is to reprofile the magazine follower. Specifically the step in the follower needs to be changed. The forward end of the step (high side) needs to be moved to the left about 2mm. The back end remains the same. Using a file (or a mill) taper the profile between those two measurements.
This change alters the relationship within the magazine box making the Grendel cartridge with it's larger shoulder dia. feed properly.NRA Basic, Pistol, Rifle, Shotgun, RSO
CCW, CQM, DM, Long Range Rifle Instructor
6.5 Grendel Reloading Handbooks & chamber brushes can be found here:
www.AR15buildbox.com
-
-
Comment
-
-
Originally posted by Drift View PostThe only problem you might run into is lack of an aftermarket synthetic stock. If that matters to you.
Well, I'm officially excited. :D The gunsmith has called and my little Grendel is ready to be picked up again -> see here (http://www.65grendel.com/forum/showthread.php?2440-Zastava-Bolt-Action/page2) for the barrel saga. I've got Friday off from work and I'm driving over to pickup the Grendel. And the rebarreled 6/223.Last edited by adamjp; 12-27-2015, 07:28 AM.
Comment
-
-
I don't know the supply situation in the USA, but they are the only 'action' available here in Australia for building this kind of rifle.
I own two Mini Mark X Mauser / Zastava m85 and neither are going anywhere.
BUT....
If I were doing it again, I would choose the Howa Mini in a heartbeat and pay to have someone make a flush fitting bottom metal and modify a High Tech stock to suit. The c.1990 Mark X and the 2010 Zastava m85 might be the same action, but the quality of fit and finish are quite different with newer not being better.
Comment
-
-
Well this brings up another question, I work at cabelas and I have access to all kinds of different actions in the used dept. I'm not sure of any of this but I would think that I could pick up a short action Savage or Remington 700 for just a couple hundred dollars and have a barrel made. Could the bolt face be changed on which caliber? Also I just saw a guy shooting what was said to be a howa 6.5 Grendel on You Tube, are they out yet? Would save me lots to expense.
Comment
-
-
-
Originally posted by Coho51 View PostWell this brings up another question, I work at cabelas and I have access to all kinds of different actions in the used dept. I'm not sure of any of this but I would think that I could pick up a short action Savage or Remington 700 for just a couple hundred dollars and have a barrel made. Could the bolt face be changed on which caliber? Also I just saw a guy shooting what was said to be a howa 6.5 Grendel on You Tube, are they out yet? Would save me lots to expense.12.5" SBR Grendel - Need Barrel
Surge - Rugged Suppressor
Been a fan of the Grendel from the very beginning and haven't second guessed that choice one time.
Aim small, miss small!
Comment
-
Comment