Tweet
Thread a rod into the gas key and make a simple guided forend attached to the other end of the rod and there you have it. Might be nice to use a softer return spring. Seems pretty simple.
-
-
Well not the concept I had in mind. Expensive too.Comment
-
A good machinist might be able to make such an upper...
Why not talk to hokeypokeykid... might get him interested.
The Kalikey guys invented a way to do a manual cycle from the rear, modified the gas key and a huge charging handle... it's kind of hard to get started, must be the inertia and twist needed to get it moving. but it does work.
I'd like to see something like the BLR lever action adapted into the AR..."Down the floor, out the door, Go Brandon Go!!!!!"Comment
-
When I read lines like this, in the article.. it makes me really question the author.Originally posted by Zeneffect View Post
"The .308 Win model doesn't appear to have a fluted barrel as the 5.56mm does, meaning brass is reloadable. Speaking of brass, the official production description advises it will only fire brass ammo, but in our experience it digested nickel plated ammo without issue."Comment
-
That oozes "I don't really know what I'm talking about".Originally posted by imaguy3 View PostComment
-
Boyz yore seein' the first indicashuns of AI in articles "written"...
yeah I saw that too, made me wonder who the heck writes like that???
"Down the floor, out the door, Go Brandon Go!!!!!"Comment
-
Maybe... but that's an old article before AI really started to explode. I think we have a dumb human instead. My point wasn't to read the article, just to look at the pictures. I didn't read it because I think it's about as useful as a muzzle loading ar15 (which imma get anyways)Comment
-
If you're referring to the "fluted barrel" part, the author actually means that the chamber isn't fluted like the .223 version. This is what the factory .223 barrel gives you:Originally posted by imaguy3 View Post
Troy-PAR-262-400x266.jpgComment
-
Maybe.. but that cycles back to "knowing what they're talking about". Fluted chamber and fluted barrel are drastically different things.Originally posted by CarpNY View PostComment
-
Still doesn't explain the "brass ammo vs nickel plated" comment.... The manufacturer was ensuring no steel case. Nickel plated brass is brass.Comment
-
Ok this explains a lot
Dude is a Canadian. Let's leave it at that, he gets the dunce pass from me. Just look at pictures and move on. He could probably tell you all about maple syrup and hockey but beyond that not much going on upstairs.Comment
-
Sounds like an honest mistake. The guy has a lot of experience in the technical fields relevant to this and much more-advanced disciplines.Originally posted by Zeneffect View PostOk this explains a lot
Dude is a Canadian. Let's leave it at that, he gets the dunce pass from me. Just look at pictures and move on. He could probably tell you all about maple syrup and hockey but beyond that not much going on upstairs.
Aircraft Structures
Artillery (lots of math)
A pump action AR-15 might be of interest to Canadians who have had their firearms ownership privileges eroded by literal communists in their government, especially under Trudeau.NRA Basic, Pistol, Rifle, Shotgun, RSO
CCW, CQM, DM, Long Range Rifle Instructor
6.5 Grendel Reloading Handbooks & chamber brushes can be found here:
www.AR15buildbox.comComment
-
I meant it as a jab towards Canadians which I find make these mistakes quite often in my experience. They get the concepts but can't convey them in words effectively unless it's those 2 before mentioned things. The 1st will get some sort of defense about Canada, and the other is hockey.
If I were a Canadian, a k31 would be at the near top of my list.Last edited by Zeneffect; 09-09-2023, 05:46 PM.Comment
-
In all of my years of reloading, I never considered this.... from the article:Originally posted by Zeneffect View Post
"The .308 Win model doesn't appear to have a fluted barrel as the 5.56mm does, meaning brass is reloadable."
Who knew.
Edit: just made my way down the thread and saw the similar comments.... apologies for the repostLast edited by Oryx; 09-13-2023, 11:15 AM.Comment
Comment