I just purchased a complete 6.5 Grendel from LaRue. I went ahead and ordered the 5.56 barrel and bolt to go with it. What's the difficulty of actually swapping the barrels on the rifle? I assume it's not something you just do all the time. My experience level with AR's is fairly low. I have owned one for years, but never built one from the ground up. Thanks in advance for the help.
LaRue Barrel Swap
Collapse
X
-
Typically from 6.5 to 5.56 and vice versa it's just barrel, bolt, and magazine.
You will probably want a separate gas block and tube to add to the simplicity of the swap, but at that point is where most people just buy another upper receiver, complete 5.56 BCG that comes with a 5.56 Bolt and charging handle and just swap uppers.
Someone with a Larue upper will probably chime in with the specifics. Typically you don't see many people swapping barrels frequently on an upper and bolts back and forth on a bcg... I mean you can, but most just dont.
-
-
There are four little bolts on the hand guard, take those off, hand guard slides off, exposes the barrel nut which comes off with the included wrench. Pull barrel, reverse procedure. Can be done in a few minutes. Go look at those youtube videos on putting together the upper receiver kits he's selling now.
Comment
-
-
Originally posted by jpistolero02 View PostI just purchased a complete 6.5 Grendel from LaRue. I went ahead and ordered the 5.56 barrel and bolt to go with it. What's the difficulty of actually swapping the barrels on the rifle? I assume it's not something you just do all the time. My experience level with AR's is fairly low. I have owned one for years, but never built one from the ground up. Thanks in advance for the help.
Comment
-
Comment