Good times this weekend. Conditions were nearly perfect for some 1K shooting Saturday- overcast, the first day in 27 consecutive it didn't break 100 degrees & little to no wind.
Rifle is one of my builds- RRA lower, Satern 20" (19.5 actually, I had it cut & threaded to 5/8 x 24), Mega side charging billet upper, Gunwerks break, CTR stock, JP rail, Geissele High Speed trigger, Zeiss Conquest 4.5x14 - 50, Larue 10 MOA canted mount.
Pic of the rifle
6.5 Grendel.jpg
I've developed 2 good loads so far, one for long range target shooting & one for varmint hunting.
Long range load- 123SMKs, 28.6g 2808, Alexander brass, 2.260 COL, CCI 450. 2550 FPS
Pic of test firing.
6.5 gren 123 smk.jpg
Pic of 1K this weekend. The hits with the blue circles are mine. .695 MOA
6.5 gren 1000 yds.jpg
Varmint load- 100 NBT, 29g 2808, IMI 7.62x39 fire formed brass, 2.260 COL, Remington 9 1/2. 2710 FPS.
Test firing.
6.5 gren 100 NBT.jpg
No pics of this weekend but I got a 3 round group of 3.5" @ 500 yds. I also slung a few out to 750. They did OK but these little bullets really run out of gas and get bullied by the wind. I could probably get a bit more velocity out of them if I were using Grendel brass but these are primarily field loads. I would rather use cheaper brass and not worry so much about finding my high dollar casings in the grass.
Rifle is one of my builds- RRA lower, Satern 20" (19.5 actually, I had it cut & threaded to 5/8 x 24), Mega side charging billet upper, Gunwerks break, CTR stock, JP rail, Geissele High Speed trigger, Zeiss Conquest 4.5x14 - 50, Larue 10 MOA canted mount.
Pic of the rifle
6.5 Grendel.jpg
I've developed 2 good loads so far, one for long range target shooting & one for varmint hunting.
Long range load- 123SMKs, 28.6g 2808, Alexander brass, 2.260 COL, CCI 450. 2550 FPS
Pic of test firing.
6.5 gren 123 smk.jpg
Pic of 1K this weekend. The hits with the blue circles are mine. .695 MOA
6.5 gren 1000 yds.jpg
Varmint load- 100 NBT, 29g 2808, IMI 7.62x39 fire formed brass, 2.260 COL, Remington 9 1/2. 2710 FPS.
Test firing.
6.5 gren 100 NBT.jpg
No pics of this weekend but I got a 3 round group of 3.5" @ 500 yds. I also slung a few out to 750. They did OK but these little bullets really run out of gas and get bullied by the wind. I could probably get a bit more velocity out of them if I were using Grendel brass but these are primarily field loads. I would rather use cheaper brass and not worry so much about finding my high dollar casings in the grass.
Comment