-
Last edited by DIANEB; 06-20-2023, 06:55 PM. -
BLC-2, 2520, Winchester 748 were the three go to powders for the Grendel when it hit the street.
I always thought BLC-2 was too dirty but a lot of guys swore by it.
If Alexander still has his load data posted, it is on there.
LR-55 -
Comment
-
Twenty six of the (currently) 704 Grendel Loads on Ammoguide.com use BL-C(2).
Several loads are available in the Grendel Handbook, particularly Volume 2.shootersnotes.com
"To those who have fought and almost died for it, freedom has a flavor the protected will never know."
-- Author Unknown
"If at first you do succeed, try not to look astonished!" -- Milton BerleComment
-
Diane- I used to use BLC2 in an Alexander arms upper 19.5'' barrel. 123 amax and 120 nosler . Right around 30.5 gr BLC2. nice & accurate. 1/2 MOA 100 yds.
never did track the "temp sensitivity" - that could be an issue. I'm always playing with different powders . haven't used BLC2 in the grendel for a while- works in 223 pretty nicely also.
hope this helpsComment
-
Thank you all for your replies...
I will go pick up a pound of BLC-2 and give it a try...Comment
-
I just picked up a pound of BLC-2 and A2460...
They also have CCI 400 and 450 primers $6 per 100...Last edited by DIANEB; 06-20-2023, 07:23 PM.Comment
-
Comment
-
I got the email thank you...
They also had lots of large and small pistol primers too...Comment
-
My favorite Grendel powder, good velocities and excellent accuracy with 120-123 grain bullets. I haven't noticed it to be especially dirty myself. It does meter nicely from powder measures.Comment
-
Thanks, I'll be loading some 123gr SMK's with BLC-2 later today...Originally posted by rickt300 View PostComment
-
BL-C2 is the only powder that I have seen affected by temp , but this was in 308Comment
Tweet
Comment