130 grain AR Hybrid OTM load data

[Big Moose]

Just wondering if anyone has some good load data for the 130 AR Hybrid OTM. Looking specifically for data using TAC in a gas gun.

[kmon]

Nope with that powder, 30.6gr CFE and overall length 2.265 works in my bolt and AR. In the bolt that combination is a true half MOA or better shooter.

[Happy2Shoot]

Just wondering if anyone has some good load data for the 130 AR Hybrid OTM. Looking specifically for data using TAC in a gas gun.

Berger, correct?

I have a great load with that bullet.

24.4gr VARGET
Hornady case new
FGMM AR primers
COL 2.244
No crimp

During the load workup
24.0gr was 0.8 MOA and spread horizontal
24.4gr was 0.5 MOA and a circular group
24.8gr was 0.9 MOA and spread horizontal again

Seemed like barrel harmonics was telling me 24.4gr

[Big Moose]

Thanks, do you have any velocity data?

[Big Moose]

Nope with that powder, 30.6gr CFE and overall length 2.265 works in my bolt and AR. In the bolt that combination is a true half MOA or better shooter.

Thanks

[GaryLL1959]

Haven't used TAC, but Leverevolution under the 130 Berger gives me good results. In MY rifle, 29.5 grains in Starline brass, CCI 41 primers, bullets seated to 2.255", gives 2470fps, and 1/2 to 5/8 inch 5 shot groups consistently in my 24 inch gas gun. Started at 28 grains worked up to 30.7 with no pressure signs, again, in MY RIFLE, but best accuracy and lowest ES was at 29.5 grains.
Ran the rifle with that load at a steel match last fall and found it good to go out to 1000 yards, but the 1190 yard target was pushing the limit.