Tweet
Heads up on the Hornady set - the 130 Nosler RDF's are too long and bottom out on the meplat in the seater plug, which caused some deformed tips for me.
Luckily for me I have a mini lathe, so I just chucked the plug up and drilled it about .200" deeper with an 11/64" bit. That's probably way more than was needed, but that's what I went with.
Otherwise, the set works well enough.
Luckily for me I have a mini lathe, so I just chucked the plug up and drilled it about .200" deeper with an 11/64" bit. That's probably way more than was needed, but that's what I went with.
Otherwise, the set works well enough.
Comment